DigiWeigh DWP-B3003 Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Timbangan DigiWeigh DWP-B3003. DigiWeigh DWP-B3003 6 halaman.
Halaman Cetak7---- data
8---- data or radix point
Ⅷ.Precautions of Use
Turn on according to the regulations before use, preheat and then
calirate the balance with standard weight. Don't use the balance in
explosion hazardous environments. If a failure occurs, refer to the
table below:
Breakdown
Reason
----upper
Overload/ underload
transverse line
Display
not
1. Poor working environment
stable
2. glass windshield is not closed
3.scrating the pan with the main
body or foreign material
4.item measured unstable
display
value
1.balance is not calibrated
does not match
2. without zeroset before use
with the actual
3.level is not adjusted
reading
Battery symbol displays
15---- ENTER
16---- line feed
Handling methods
Unload/Recalibrate
improve it
close it
eliminate
foreign material
fix the item
Caliration
Press " TARE" key
Adjust the level
Replace the battery
-5-
Ⅶ. RS232 Operation (Optional function)
Stnadard RS232 comminication interface can be optional. Sandard
9-pin RS232 cable can be used to communicate with the computer.
a. Click the "Start"/ "Programs"/ " Accessories"/ "Comunication"/
"Super terminal" on the computer screen, enter a name, select the
icon, then click "OK". Just select "Connect using (N): COM1"
and clikc "OK".
Choose:
1. Baud rate:9600
2. Data bits:8
3. Parity: None
4. Stop bit: 1
5. Data control: Hardware
the
Then click "OK" , it will display the current weight balance on
the computer.
b. Data output order instructions
1---- space
2---- space
3---- space or *
4---- + or *
5---- data
6---- data
9---- data or radix point
10---- data or radix point
11---- data
12---- data
13---- unit 1
14---- unit 2
-4-