Epson 2000P - Stylus Photo Color Inkjet Printer Setup Manual - Halaman 14

Jelajahi secara online atau unduh pdf Setup Manual untuk Aksesori Printer Epson 2000P - Stylus Photo Color Inkjet Printer. Epson 2000P - Stylus Photo Color Inkjet Printer 17 halaman. Product support bulletin(s)
Juga untuk Epson 2000P - Stylus Photo Color Inkjet Printer: Penggantian Kartrid (2 halaman), Buletin Dukungan Produk (6 halaman), Buletin Dukungan Produk (1 halaman), Spesifikasi (1 halaman), Informasi Produk (13 halaman), Panduan Pengguna (12 halaman), Buletin Dukungan Produk (3 halaman), Buletin Dukungan Produk (2 halaman), Buletin Dukungan Produk (4 halaman), Buletin Dukungan Produk (7 halaman), Panduan Memulai Cepat (2 halaman), Panduan Petunjuk Instalasi (8 halaman)

Checking the Printer

Before printing your first page, you need to make sure the printer is

working correctly by printing a nozzle check page and, if necessary,

cleaning the print head.

Follow these steps to load plain paper in the printer.

1. Lower the output tray and slide out the extension. Next, slide the

left edge guide so that the distance between the edge guides is

slightly wider than the width of your paper.

edge guide

2. Fan a stack of paper, then tap it on a flat surface to even the edges.

3. Load the stack of paper with the printable side up and the right edge

of the paper resting against the right side of the sheet feeder. Then

slide the left edge guide against the left edge of the paper.

printable

side up

Note:

Always load paper into the sheet feeder short edge first.

Make sure the paper stack fits under the arrow mark inside the edge

guide.

output tray