Epson 2000P - Stylus Photo Color Inkjet Printer Setup Manual - Halaman 5

Jelajahi secara online atau unduh pdf Setup Manual untuk Aksesori Printer Epson 2000P - Stylus Photo Color Inkjet Printer. Epson 2000P - Stylus Photo Color Inkjet Printer 17 halaman. Product support bulletin(s)
Juga untuk Epson 2000P - Stylus Photo Color Inkjet Printer: Penggantian Kartrid (2 halaman), Buletin Dukungan Produk (6 halaman), Buletin Dukungan Produk (1 halaman), Spesifikasi (1 halaman), Informasi Produk (13 halaman), Panduan Pengguna (12 halaman), Buletin Dukungan Produk (3 halaman), Buletin Dukungan Produk (2 halaman), Buletin Dukungan Produk (4 halaman), Buletin Dukungan Produk (7 halaman), Panduan Memulai Cepat (2 halaman), Panduan Petunjuk Instalasi (8 halaman)

After connecting the printer to your computer, you need to install the

software included on the "Printer Software for EPSON Stylus Photo

2000P" CD-ROM shipped with your printer.

Your printer software includes:

Printer driver and utilities

The printer driver runs, or "drives," your printer; use it to make

settings such as Print Quality, Media Type, and Paper Size. The

Nozzle Check, Head Cleaning, and Print Head Alignment utilities

help you keep your printer in top operating condition. EPSON

Status Monitor 3 (for Windows) or EPSON StatusMonitor (for

Macintosh) notifies you of printer errors and displays printer status

information such as the amount of ink remaining. The Status

Monitor also guides you through the ink replacement process.

Online guides

The online Reference Guide and Color Guide help you learn more about

your printer and color printing.

If you are using the floppy disk version of the software, make a backup

copy of the EPSON printer software disk before you begin installation.

If you wish to make a floppy disk version of the printer software on your

CD-ROM, you can use the driver disk creation utility included on the

CD.

Installing in Windows

Follow these steps to install your printer software.

1. Make sure that your printer is off.

2. Turn on your computer and start Windows. If the New Hardware

Found screen or any other wizard appears, click Cancel.

3. Insert the printer software CD shipped with your printer in the CD-

ROM drive. The Installer dialog box appears. (For floppy disk users,

insert the disk in a disk drive and double-click the My Computer

icon, then the floppy disk drive icon, and then Setup.exe.)

Installing the Printer Software

Printed in Japan 00.xx-xx