Epson 7800 - Stylus Pro Color Inkjet Printer Manual Pembongkaran dan Pengaturan - Halaman 8

Jelajahi secara online atau unduh pdf Manual Pembongkaran dan Pengaturan untuk Aksesori Printer Epson 7800 - Stylus Pro Color Inkjet Printer. Epson 7800 - Stylus Pro Color Inkjet Printer 27 halaman. Stylus pro 800 series
Juga untuk Epson 7800 - Stylus Pro Color Inkjet Printer: Brosur & Spesifikasi (8 halaman), Spesifikasi (4 halaman), Panduan Memulai (10 halaman), Panduan Pengguna (11 halaman), Panduan Referensi Cepat (12 halaman), Panduan Tambahan (1 halaman), Garansi Terbatas (12 halaman), Brosur & Spesifikasi (8 halaman), Buletin Dukungan Produk (10 halaman), Brosur & Spesifikasi (16 halaman), Lembar Pemberitahuan (4 halaman)

2. Lift the box up and away from the printer.

Remove all items from the hollow (A and B)

on the rear side of the printer.

Note:

The ink cartridges included with your printer are

primarily for initial setup.

3. Take out the cardboard panels from the

printer.

Mounting the printer on the base unit

1. Lock the two casters (J) and extend the two

stabilizer knobs (K) underneath the base unit.

Note:

Place the casters sideways and lock them so they

will not move.

2. Position the base unit in front of the printer

unit as shown.

3. Mount the printer on the base unit as shown

below.

Caution:

Do not attempt to lift the printer unit with

fewer than four people.

Note:

When you place the printer on the base unit, match

the right end square of the printer (shown as 4 in

the illustration below) to the square of the same part

of the base unit.

top view