DIGMESA FC-PRO Panduan Pengoperasian - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Monitor DIGMESA FC-PRO. DIGMESA FC-PRO 20 halaman.

Programming and settings

Select Day counter or Total counter on the display and

keep the Mode button pressed for 5 seconds.

If the unit is protected by a code, you will be requested

to enter this code (Code, Chapter 14).

SYSTEM LED is illuminated.

ALARm is shown on the display.

Setting is described on page 11.

In Setting mode, if no button is pressed for 30 seconds,

the display goes back to the Day counter.

If the Up button is pressed once, the display switches to

P/L (pulses per litre, manual). It returns to Alarm with the

Down button.

P/L setting is described on page 12.

If the Up button is pressed one more time, the display

switches to Auto P/L (pulses per litre, automatic). It returns

to P/L with the Down button.

AUTO P/L setting is described on page 13.

If the Up button is pressed once again, the display swit-

ches to COdE setting. It returns to AUTO P/L with the

Down button.

COdE setting is described on page 14.

Hold down the Mode button for 5 seconds to switch back

to Day counter or Total counter.

FC PRO ENG

Page 10