Epson C823301 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Printer Epson C823301. Epson C823301 18 halaman. Epson user's manual fax i/f board c823301

Halaman Cetak

Installing the fax board in your printer

After you have set the DIP switches, install the fax board in

your printer following the instructions in your printer manual.

See the section on installing an optional interface board.

Connecting the board

After you have installed the board, connect the phone cable

included with the board to the connector labeled LINE on the

board. Plug the other end into a standard modular-type

telephone connector (jack). If you wish, you can also plug a

telephone into the connector labeled PHONE.

Manual Reception

Button

Performing a self test

After you have installed the fax board in your printer, perform

a self test by following the steps below:

1. While holding down the manual reception button on the

fax board, turn on the printer.

2. Release the manual reception button when the printer's

FEED indicator starts blinking.

The printer then prints a two-page self test. This shows that the

board is properly installed and gives you information about the

board and its settings.

to Phone Line to Telephone

Serial Interface

setup