Epson FX-1180 - Impact Printer Setup Manual - Halaman 18

Jelajahi secara online atau unduh pdf Setup Manual untuk Aksesori Printer Epson FX-1180 - Impact Printer. Epson FX-1180 - Impact Printer 33 halaman. Epson serial impact dot matrix printers
Juga untuk Epson FX-1180 - Impact Printer: Brosur & Spesifikasi (24 halaman), Informasi Produk (17 halaman), Panduan Referensi Cepat (16 halaman), Manual (11 halaman), Spesifikasi (2 halaman), Manual (18 halaman), Spesifikasi (2 halaman), Garansi Terbatas (1 halaman), Panduan Referensi (34 halaman), Panduan Cepat (33 halaman)

1-6 Plugging in the Printer

Follow these steps to plug in the printer:

1. Make sure the printer is turned off. The printer is off when

the power switch is pressed down to the N side.

2. Check the label on the back of the printer to make sure the

voltage required by the printer matches that of your electrical

outlet. Also make sure the shape of the plug on your printer's

power cord matches the shape of your electrical outlet.

3. If the power cord is not attached to the printer, plug the

appropriate end into the AC inlet on the back of the printer.

4. Plug the power cord into a properly grounded electrical

outlet.

Setting Up the Printer

Caution:

It is not possible to change the printer's voltage. If the rated

voltage on the printer and your outlet voltage do not match,

contact your dealer for assistance. Do not plug in the power

cord.