Epson FX-1180 - Impact Printer Panduan Cepat - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Aksesori Printer Epson FX-1180 - Impact Printer. Epson FX-1180 - Impact Printer 33 halaman. Epson serial impact dot matrix printers
Juga untuk Epson FX-1180 - Impact Printer: Setup Manual (33 halaman), Brosur & Spesifikasi (24 halaman), Informasi Produk (17 halaman), Panduan Referensi Cepat (16 halaman), Manual (11 halaman), Spesifikasi (2 halaman), Manual (18 halaman), Spesifikasi (2 halaman), Garansi Terbatas (1 halaman), Panduan Referensi (34 halaman)

Paper-Thickness Setting

Before you start printing, you may need to

change the paper-thickness setting

depending on the type of paper you are

using. Follow these steps:

1. Turn the printer off and open the printer

cover. The paper-thickness lever is

located on the left side of the printer. The

numbers next to the lever indicate the

thickness setting.

Downloaded from:

http://www.usersmanualguide.com/

EPSON FX-880+/FX-1180+ Quick Guide

2. Use the table below to select the

appropriate paper thickness.

Paper type*

Ordinary paper:

Single sheets

Continuous paper

Thin paper

Carbonless multipart forms with:

2 parts (original + 1 copy)

3 parts (original + 2 copies)

4 parts (original + 3 copies)

5 parts (original + 4 copies)

6 parts (original + 5 copies)

Continuous paper with labels

Envelopes

* See the paper specifications for more information.

Note:

❏ When the temperature is 5°C (41°F) or less,

set the paper-thickness lever one position

lower to improve print quality.

❏ When the temperature is 35°C (95°F) or

more, set the paper-thickness lever one

position higher to improve print quality.

Paper-Thickness Setting (1/1)

Lever

position

0 or 1

-1 or 0

2 to 6