Epson FX-880+ Panduan Referensi - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Referensi untuk Aksesori Printer Epson FX-880+. Epson FX-880+ 34 halaman. Epson serial impact dot matrix printers
Juga untuk Epson FX-880+: Setup Manual (33 halaman), Brosur & Spesifikasi (24 halaman), Manual (18 halaman), Spesifikasi (2 halaman), Baca Ini Terlebih Dahulu (2 halaman), Panduan Cepat (33 halaman)

Halaman Cetak
Epson FX-880+ Panduan Referensi
LQ-1150 default-setting mode
This printer has no DIP switches; however, the following settings can be made in a special
default-setting mode.
Setting
Page length for tractor
Skip-over-perforation
Auto tear off
Auto line feed
Print direction
Software
0 slash
High speed draft
I/F mode
Auto I/F wait time
Baud rate
Parity
Data length
Parallel I/F bidirectional mode
Packet mode
Character table
International character set
Font *1
Auto CR(IBM PPDS)
A.G.M. (IBM PPDS)
Manual feed wait time
Buzzer
Roll paper
Note: Bold letters indicate the standard factory settings.
*1 The selected Font (OCR-B, Orator, Orator-S, Script C, Roman T, Sans Serif H) is set to 'Others'
on the control panel.
Draft, Draft Condensed, Roman, Sans Serif, Courier, Prestige and Script can be selected through
the control panel only.
3inch, 3.5inch, 3.66inch, 4inch, 4.5inch, 5.5inch, 6inch, 7inch, 8inch, 8.5inch, 11inch, 70/6inch, 12inch,
19200BPS,9600BPS,4800BPS,2400BPS,1200BPS,600BPS,300BPS
Italic, PC437, PC850, PC860, PC863, PC865, PC861, BRASCII, Abicomp, Roman8, ISO Latin 1, PC858,
Italic U.S.A., Italic France, Italic Germany, Italic, U.K., Italic Denmark 1, Italic Sweden, Italic Italy, Italic
OCR-B, Orator, Orator-S, Script C, Roman T, Sans serif H
1 seconds, 1.5 seconds, 2 seconds, 3 seconds
20
Options
14inch
OFF, ON
OFF, ON
OFF, ON
Bi-d., Uni-d., Auto
ESC/P2, IBM PPDS
OFF, ON
OFF, ON
Auto, Parallel, Serial
10 seconds, 30 seconds
None,Odd,Even,Ignore
8bit,7bit
OFF, ON
Auto, OFF
ISO 8859-15
Spain 1
OFF, ON
OFF, ON
OFF, ON
OFF,ON