TomTom LINK 510 Panduan Instalasi - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk GPS TomTom LINK 510. TomTom LINK 510 35 halaman. Vehicle tracking device
Juga untuk TomTom LINK 510: Panduan Pengguna (37 halaman), Panduan Instalasi (16 halaman)

Halaman Cetak

1. Remove the rubber cap from the GPS antenna connector.

2. Insert the plug of the GPS antenna into the GPS antenna connector on the LINK 510.

3. Prepare a smooth, clean, oil free and dry surface on the windscreen.

4. Attach the antenna to the prepared surface so that the top side has a clear view of the

sky. Either locate a smooth metal surface or use the extra adhesive pad.

Mounting the external GSM/GPRS antenna

If you install the LINK 510 in a position where it has poor GSM/GPRS reception, you need

to use the external GSM/GPRS antenna accessory from TomTom Business Solutions, Art.

no. 9KLE.001.03, which comes with an adhesive pad. The external GSM/GPRS antenna

from TomTom Business Solutions is not part of the standard LINK 510 product package.

To check if your LINK 510 has GSM/GPRS reception see Diagnostics on page 22.

Important

• Only use the GSM/GPRS antenna from TomTom Business Solutions, otherwise GSM/

GPRS performance may be poor or not work at all.

• Tinted metallised windscreens or those with integrated filament heating may prevent

good GSM/GPRS reception. In this case, place the GSM/GPRS antenna in the rear

window or on the outside of the vehicle.

• Install the GSM/GPRS antenna in a place where it is unobstructed by metal objects. The

GSM/GPRS antenna must be placed with minimum 5 cm distance to metal objects. The

top side of the GSM/GPRS antenna must not be obstructed by metal items.

• The GSM/GPRS antenna must be placed with the adhesive pad on an oil free, dry and

clean surface.

• Extreme temperature changes or differences can affect the adhesive property of the

pad.

1. Remove the rubber cap from the GSM/GPRS antenna connector.

2. Insert the plug of the GSM/GPRS antenna into the GSM antenna connector on the LINK

510.

3. Prepare a smooth, clean, oil free and dry surface on the windscreen.

4. Attach the antenna to the prepared surface so that the top side has clear view of the sky.

Either locate a smooth metal surface or use the extra adhesive pad.