TomTom LINK 510 Panduan Pengguna - Halaman 21

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk GPS TomTom LINK 510. TomTom LINK 510 37 halaman. Vehicle tracking device
Juga untuk TomTom LINK 510: Panduan Instalasi (35 halaman), Panduan Instalasi (16 halaman)

Halaman Cetak

Testing operation

In addition to the tests described below you can also test the operation of your LINK 510 using the

TomTom Telematics Diagnostic Tool with Bluetooth.

Power or Ignition test

Before testing the connection to power and to the ignition make sure you have properly carried

out the installation.

1. Check all connections to your LINK 510 device (wires, fuses etc.).

2. Turn off the ignition.

The green LED should be off and then go on every 3 seconds.

3. Turn on the ignition.

The green LED should be on and then go off every 3 seconds. If the device is already

ed, the green

LED should be on all the

If the LED does not perform as described, monitor the LEDs for

Mobile network reception test

For this test, you may need to move the vehicle to a location with a clear view of the sky, to make

sure that you have adequate GPS and mobile network reception.

For this test put your LINK 510 device in the

1. Turn on the ignition.

2. Look at the yellow LED. It should be on and then go off every 3 seconds.

As soon as the device has established a connection to WEBFLEET the yellow LED stays on all the

time.

If the LED keeps flashing for longer than 10 minutes, monitor the LEDs for

time.

position where you want to fix

diagnostics

it.

diagnostics

activat-