Argos Valencia 633/7777 Manual Petunjuk Perakitan - Halaman 15

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Perabotan Dalam Ruangan Argos Valencia 633/7777. Argos Valencia 633/7777 20 halaman. 600mm larder cabinet

Halaman Cetak

Assembly Instructions

Step 19

Drill the handle holes

in the door

Important: Please follow

these instructions

carefully.

Lay the doors

and

down onto a smooth

surface.

Important: Carefully

choose which holes you

need to drill.

This will depend on

which side

you fitted the hinge

plates

Check that the holes and

hinges are in the same

place as the diagrams.

Using the pilot hole in

the rear face of the door,

drill through the holes

indicated opposite, using

a 2.5mm diameter drill.

Turn the door over and

open out the 2.5mm

holes that you have just

drilled by drilling back

through them with a

5mm drill.

Note: Drill bits are not

provided.

Fit a soft close fitting

onto the 1 hinge shown

on each door.

Push the hooks on the

soft-close fitting into the

holes on the hinge and

then press down to click

into place.

PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY

TO CHOOSE WHICH 2 HOLES YOU WILL NEED TO DRILL

Important

ONLY drill the

2 holes in each

door shown

here if you

have fitted the

hinges to the

RIGHT side.

ONLY drill

these 2 holes

Small piece of

waste wood

DO NOT drill

any other holes

ONLY drill

these 2 holes

If you have

fitted the

hinges on the

LEFT side,

go to the

previous step.

Note: We recommend

the use of a small piece

of waste wood, placed

behind the hole while

drilling, to reduce the

possibility of any

breakout.

DO NOT drill

any other holes