DIHL KA-AFD04 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penggorengan DIHL KA-AFD04. DIHL KA-AFD04 9 halaman. Digital air fryer

Turn the temperature control knob to the required temperature. See the settings guide included to determine

the right temperature.

Determine the required preparation time for the ingredient. Again, see the settings guide.

To switch on the appliance, turn the timer knob to the required time.

Add 3 minutes to the time when the appliance is cold.

Operational Notes

~ The heating light comes on until the required temperature is achieved.

~ During the hot air frying process, the heating light comes on and goes out periodically. This indicates that the

heating element is turning on and off to maintain the set temperature.

~ Excess oil from the ingredients is collected on the bottom of the pan.

Some ingredients require shaking halfway through the preparation time. To shake the ingredients, pull the pan

out of the appliance by the handle and - without removing the tray from the pan - shake the contents using the

handle. Finally, slide the pan back into the air fryer to resume.

When you hear the bell, the set time has elapsed. Pull the pan out of the appliance and place it on a

heat-resistant surface.

Note: You can also switch off the appliance manually. To do this, turn the temperature control knob to 0.

10.

Check if the ingredients are ready. If the ingredients are not ready yet, simply slide the pan back into the

appliance and set the timer to a few extra minutes. After air frying, the pan and the ingredients will be hot.

Depending on the type of ingredients in the air fryer, steam may escape from the pan.

Tip: Use tongs, a serving spoon, or similar to aid the removal of fragile or large amounts of ingredients.

11.

You don't need to wait to use the air fryer again straight after cooking a set of ingredients. There may be an

excessive amount of oil or remnants in the pan after several cycles, or certain types of food, which you may

want to remove before continuing to fry. In such a case, wait for the appliance to cool down and follow the

correct procedure outlined in the "Cleaning" section.

12.

If you want to remove the handle and fascia from the pan, press the release button and remove on an angle.

Automatic Switch-Off

This appliance is equipped with a timer. When the timer has counted down to 0, the appliance produces a bell

sound and switches off automatically. To switch off the appliance manually, turn the timer knob anticlockwise to

Cleaning

Clean the appliance after every use to avoid oil and remnants building up.

The pan has a non-stick coating. Do not use metal utensils or abrasive cleaning materials to clean them,

as this may damage the coating.

Remove the mains plug from the wall socket and let the appliance cool down.

Note: remove the pan and baking tray to let the air fryer cool down more quickly.

Wipe the outside of the appliance with a moist cloth.

Note: you should use a dry cloth to clean the light area.

Clean the pan and the baking tray with hot water, some washing-up liquid and a non-abrasive sponge.

You can use a degreasing agent to remove any remaining deposits.

Clean the inside of the appliance with hot water and a non-abrasive sponge.

Clean the heating element with a cleaning brush to remove any food residues.

Wait for the unit to dry before operating.