To keep your printer operating at its best, you should clean it
thoroughly several times a year. Follow these steps:
1. Remove any paper loaded in the printer and turn it off.
2. Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer.
3. Remove the paper guide. If a pull tractor or an optional cut-
sheet feeder is installed, remove it.
4. Use a soft brush to carefully brush away all dust and dirt
from the outer case and paper guide.
5. If the outer case or paper guide is still dirty, clean it with a
soft, clean cloth dampened with mild detergent dissolved in
water. Keep the printer cover in place and lower it until it
lies flat on the top of the printer to prevent water from
getting inside the printer.
If you need to transport your printer some distance, carefully
repack it using the original box and packing materials, as
described below.
1. Remove any paper in the printer and turn it off.
2. Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer.
3. Remove the paper guide.
4. If a pull tractor is installed, remove it. If any options are
installed, remove them and pack them in their original
boxes.
5. Make sure that the print head is not hot. Then remove the
ribbon cartridge.
6. Remove the paper tension unit. Attach the protective
locking clips on both sides of the printer roller. Then install
the paper tension unit.
7. Make sure the tractor that came with your printer is
installed in the push position.
8. Repack the printer, ribbon cartridge, and paper guide in the
original packing materials and place them in the printer's
original box.
4011805
EPSON LQ-570e Quick Reference Guide
4011804
EPSON LQ-570e User's Guide
4012108
EPSON LQ-570e Read This First
TM-LQ570e
EPSON LQ-570e Service Manual
PL-LQ570e
EPSON LQ-570e Parts Price List
4/00
EPSON LQ-570e
EPSON LQ-570e
- 17
Halaman Cetak