Crouzet TIMER 812 Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pengatur waktu Crouzet TIMER 812. Crouzet TIMER 812 3 halaman.

MOUNTING REQUIREMENTS

RUN MODE

Incrementation of value T by pressing one of the 4 keys

NOTE:

a) During operation of the timer, change of time delay values:

• taken into account immediately if your display is on the up count (Up) and if the new

value is greater than the time that has already elapsed,

• will be taken into account in the next cycle if you are on a down count display (down).

b) The unit is supplied with the fol/owing configuration: 0.100 s, d (down), C (mode).

c) If, inadvertently, you enter the unit test procedure with the entire screen or certain

segments of the screen flashing, press the Mode pushbutton until Bp is obtained on the

screen, then press Valid to return to normal operation.

UTILIZATION PRECAUTIONS

The power cables and input circuits must be separate

A minimum requirement for ventilation and protection from vibration must be proven.

This equipment contains a lithium battery, do no incinerate the unit.

Configuration mode

T RANGE

UP DOWN

2/3

= Press one of

the 4 keys

Time Display

Sec., Min., Hr., Hr : Min,

Hr : Min : Sec

U = Up Count

d = Down Count

corresponding to each digit.