Acuity Brands Lighting Lithonia Lighting HLF LED Panduan Petunjuk Instalasi - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Peralatan Pencahayaan Acuity Brands Lighting Lithonia Lighting HLF LED. Acuity Brands Lighting Lithonia Lighting HLF LED 7 halaman.

Halaman Cetak
Installation Instructions
HLF LED
Shielding Options: The doorframe can be opened with any of the shielding options attached. Attach with the 8-32
thread forming screws provided. Holes will be provided in the doorframe. Should the doorframe holes need be cleared
for any reason, drill no deeper than 1/2" with a .147" (#26) diameter drill.
UPPER or BOTTOM VISOR (UBV)
VANDAL GUARD (VG)
Troubleshooting: If this fixture fails to operate properly, check to make sure: • The fixture is wired correctly. • The
fixture is grounded correctly. • The line voltage at the fixture is correct. If all these variables have been checked
and the fixture still does not operate as specified, contact your local Lithonia Lighting distributor.
Lithonia Lighting Outdoor • One Lithonia Way • Conyers, Georgia 30012
Phone: 800-279-8041 • Fax: 770.918.1209 •
© 2012 Acuity Brands Lighting, Inc. All rights reserved. Rev. 3/13
FULL VISOR (FV)
WIRE GUARD (WG)
www.lithonia.com
5 year limited warranty
Part Number: RJ521380 Rev C
Revision Date: 12-4-19