Crow EDS-2000AM Petunjuk Pemasangan & Panduan Pengguna - Halaman 16
Jelajahi secara online atau unduh pdf Petunjuk Pemasangan & Panduan Pengguna untuk Sensor Keamanan Crow EDS-2000AM. Crow EDS-2000AM 20 halaman. Outdoor pir + mw detector
Juga untuk Crow EDS-2000AM: Panduan Petunjuk Instalasi (18 halaman), Panduan Petunjuk Instalasi (18 halaman)
Halaman Cetak
9
Operation
Note! Connect the EDS-2000 to a positive Voltage output of 9.6 -16VDC source.
Use only a listed power limited source.
The detector shall be provided with minimum of 4 hours of standby power from either a
listed compatible control unit or power supply.
The detector is automatically operated once connected to power.
The LEDs start flashing one at a time (side to side) for 30 seconds during the warm-up period
and after that it will turn off.
At this time the detector is ready for operation.
16