Epson RX500 - Stylus Photo Color Inkjet Mulai dari Sini Manual - Halaman 3

Jelajahi secara online atau unduh pdf Mulai dari Sini Manual untuk Aksesori Printer Epson RX500 - Stylus Photo Color Inkjet. Epson RX500 - Stylus Photo Color Inkjet 9 halaman. Product support bulletin(s)
Juga untuk Epson RX500 - Stylus Photo Color Inkjet: Panduan Pemilik (15 halaman), Panduan Pengguna (20 halaman), Lembar Informasi Produk (4 halaman), Spesifikasi (2 halaman), Setup Manual (2 halaman), Panduan Pengguna (12 halaman), Memperbarui (1 halaman), Buletin Dukungan Produk (6 halaman), Buletin Dukungan Produk (1 halaman), Panduan Instruksional (4 halaman)

Unlock the Printer

Lift up the entire scanner unit using the

handles on the side.

Remove the orange plastic

print head holder.

Caution: You must remove

the orange print head

holder or the RX500

won't work.

Store the orange print head

holder in the storage area.

Close the scanner unit.

Plug In and Turn On

Plug the RX500 into a grounded electrical outlet.

Do not connect a USB cable yet.

Press and hold the On

button until the green Mode

lights begin to flash.

Press the Color button on the front of the

RX500. The print head moves into

loading position.

Lift up the entire scanner unit.

Open the cartridge cover by pulling it

toward you.

Remove the ink cartridges from their packages.

Caution: You must install all the cartridges and leave them installed

for all types of printing. To avoid damaging the RX500, never move the

print head by hand.

Lower each cartridge into the holder marked with the

corresponding color.

On button

continue