Epson Stylus C40UX Panduan Memulai Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Aksesori Printer Epson Stylus C40UX. Epson Stylus C40UX 6 halaman. Color ink jet printer
Juga untuk Epson Stylus C40UX: Mulai di sini (2 halaman), Brosur (2 halaman), Spesifikasi (33 halaman), Lembar Informasi Produk (4 halaman), Spesifikasi (1 halaman), Informasi Produk (9 halaman), Baca Panduan Pertama Ini (12 halaman), Spesifikasi (2 halaman), Buletin Dukungan Produk (3 halaman), Manual (2 halaman), Panduan Memulai Cepat (3 halaman), Pengaturan (2 halaman)

Halaman Cetak

Epson Stylus C40UX Panduan Memulai Cepat

Periodic Maintenance

Cleaning the Print Head

If dots or lines are missing in your printout, clean the print head.

Make sure the

If it is, replace the ink cartridge instead.

Hold down the

The

Power light starts flashing and the printer makes noise.

Maintenance

button

When the

If print quality doesn't improve, repeat these steps.

There are other ways to clean the print head and check the print quality.

See the printer manual on your CD-ROM for more information.

Replacing an Ink Cartridge

To ensure good results, use genuine EPSON ink cartridges and don't refill them.

Other products may cause damage to your printer not covered by EPSON's

warranty.

Low ink:

Error light flashes and a status screen appears telling you

which cartridge is low.

Empty cartridge:

Open the printer cover and press the

The print head moves to the cartridge's replacement position. (If both

cartridges need replacement, it moves to the black cartridge position first.)

Lift the ink cartridge clamp and remove the cartridge.

Unpack the new ink cartridge and remove the yellow tab.

Insert the new cartridge and close the clamp.

Press the

close the printer cover. (If the other

cartridge needs replacement, the print

head moves into loading position.

Repeat steps 2 through 5.)

Wait until ink charging is finished

(the

Power light stops flashing

and the

Error light isn't flashing or on.

Maintenance button for 3 seconds, then release it.

Power light stops flashing, the cleaning cycle is finished.

Black cartridge:

T013201 (U.S.) or

T013311 (Canada)

Error light stays lit and the empty cartridge is indicated

on the screen; you must replace it to continue printing.

Maintenance button and

Error light goes out).

Maintenance button for 6 seconds.

If ink gets on your hands, wash them with

soap and water. If it gets in your eyes, flush

them immediately with water.

Don't turn off the printer

while the

Power light

is flashing.

Color cartridge:

T014201 (U.S.) or

T014311 (Canada)