Epson Stylus C88 Informasi Produk - Halaman 6

Jelajahi secara online atau unduh pdf Informasi Produk untuk Aksesori Printer Epson Stylus C88. Epson Stylus C88 11 halaman. Epson stylus c88: quick reference
Juga untuk Epson Stylus C88: Panduan Penjualan (4 halaman), Spesifikasi (2 halaman), Ringkasan Teknis (6 halaman), Mulai dari Sini Manual (8 halaman), Panduan Cepat (44 halaman)

Halaman Cetak

Epson Stylus C88

Cleaning the Print Head

If your printouts are unexpectedly light, or dots or lines are

missing, you may need to clean the print head. This unclogs

the nozzles so they can deliver ink properly. Print head

cleaning uses ink, so clean it only if quality declines.

This section explains how to clean the print head using the

Head Cleaning utility.

You can also clean the print head by holding down the

button on the printer for three seconds. (This only works

when the red

light is off.)

Note: When you don't turn on your printer for a long time, print

quality can decline, so turn it on and print a few pages at least once a

month to maintain good print quality.

Running the Head Cleaning Utility

1. Make sure the printer is turned on but not printing, and the

red

ink light is off. (If the

you need to replace a cartridge.)

2. Windows: Right-click the

(in the lower right corner of your screen). Select

Cleaning

Note: If you don't see the icon, go to your printer properties

window, click the Maintenance tab, then select Head Cleaning.

Macintosh OS X: Open the

double-click

Epson Printer Utility

the printer list, click

You see a screen like the following:

3. Click

Start

Cleaning takes several seconds. The printer makes noise and

the green

power light flashes.

Caution: Never turn off the printer while head cleaning is in

progress; you may damage the printer.

Epson Stylus C88

ink light is flashing or on,

printer icon on your taskbar

Head

folder and

Applications

. Select

Stylus C88

, and select

Head Cleaning

4. When the green

paper is loaded in the printer, then do the following:

Windows: Click

Macintosh: Click

The nozzle check pattern is printed.

5. If the pattern has no gaps or

white lines, click

If the pattern has white lines

or gaps, click

the print head again.

You can also turn the printer off and wait overnight—this

allows any dried ink to soften—and then try cleaning the print

head again.

Replacing an Ink Cartridge

When the red

cartridges are low on ink.

When the red

cartridge(s).

When you print, you'll also see a message on your screen

telling you which cartridge is low or empty.

When a cartridge is more than six months old, you may need

to replace it if printouts don't look their best. If the quality

doesn't improve after cleaning and aligning the print head,

you can replace the cartridge even if the red

Note: You cannot continue printing with one ink cartridge empty,

even if the other cartridges still contain ink. Before printing, replace

the empty cartridge.

Checking the Ink Supply

To check your ink supply, do the following:

Windows: Double-click the

taskbar.

Note: If you don't see the icon, go to your printer properties

window, click the Maintenance tab, then select Status Monitor.

6/05

power light stops flashing, make sure

Print Nozzle Check Pattern

, then click

Confirmation

Finish

to clean

Clean

ink light flashes, one or more ink

ink light stays on, you need to replace the

icon on the Windows

. Then click

ink light is off.