Epson Stylus Color 400 Panduan Pengguna - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Printer Epson Stylus Color 400. Epson Stylus Color 400 29 halaman. Ms windows 3.x color printer drivers problems
Juga untuk Epson Stylus Color 400: Lembar Spesifikasi (2 halaman), Lembar Informasi Produk (4 halaman), Manual (12 halaman), Manual (13 halaman), Panduan Pengaturan Cepat (13 halaman), Panduan Informasi Produk (12 halaman), Buletin Dukungan Produk (6 halaman), Buletin Dukungan Produk (4 halaman)

Disassembly and Assembly

3.2.4.9 Removing the PE Paper Sensor Assembly

1. Remove the housing. (See Section 3.2.1.)

2. Release 2 hooks securing the PE sensor assembly to the back of the frame, and remove the PE sensor

assembly, sliding it upward. Remove PE board assembly and PE lever, if necessary.

During assembly, make sure the tip (sensor part) of the sensor lever is in the hole in the paper guide

assembly.

3-26

After releasing 2 hooks, remove

the PE paper sensor assembly

by sliding it upward.

PE Holder

This side should be

installed on the frame.

PE Board Assembly

Figure 3-23. Removing the PE Paper Sensor Assembly

(From back side of the frame)

Torsion Spring (0.22 g)

EPSON Stylus COLOR 400 Service Manual

PE Lever