Control Panel
paper out light
black ink
out light
color ink
cleaning
out light
button
The four lights on your printer's control panel show the
printer's status and alert you to problems like paper jams.
The power light is on when the printer is on
P
and ready to print. The power light flashes
when the printer is receiving a print job or
performing a maintenance operation such as
cleaning the print head.
B or A When an ink out light flashes, your ink
supply is low. Make sure you have a
replacement cartridge.
When an ink out light comes on, you need to
replace the ink cartridge. See "Replacing an
Ink Cartridge" for instructions.
When the paper out light comes on, your
S
paper ran out or is incorrectly loaded. Make
sure none of the sheets are curled, creased,
old, stuck together, or too thin. Reload the
paper against the right edge guide and slide
the left edge guide over to the paper's left
edge. Then press the E load/eject button.
When the paper out light flashes, you have a
paper jam. Turn off the printer and gently
pull out all paper. Make sure none of the
sheets are curled, creased, old, stuck
together, or too thin. Reload the paper
against the right edge guide and slide the left
edge guide over to the paper's left edge.
Then turn the printer on.
load/eject
power light
button
power
button
When the P power and S paper out
P S B A
buttons flash and the B black and A color
ink out lights come on, jammed paper may
be blocking movement of the print head.
Turn off the printer (press the P power
button); wait 15 seconds; then turn it on
again. If this does not clear the error, contact
your dealer or EPSON as described in the
Printer Basics book.
When all the lights flash, your printer may
have an internal error. Turn off the printer
(press the P power button); wait 15 seconds;
then turn it on again. If this does not clear
the error, contact your dealer or EPSON as
described in the Printer Basics book.
When all the lights are off, the printer is not
receiving power. Try these solutions:
Make sure the printer is turned on.
Turn off the printer, plug in the power
cord securely, and turn on the printer.
Make sure the outlet is not controlled by
a switch or timer and is operable.
7/98
EPSON Stylus COLOR 440
EPSON Stylus COLOR 440
- 5