Epson Stylus color 600 Panduan Pengguna - Halaman 25

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Printer Epson Stylus color 600. Epson Stylus color 600 35 halaman. Epson stylus color 600: quick setup
Juga untuk Epson Stylus color 600: Panduan Pengguna (34 halaman), Panduan Pengguna (38 halaman), Spesifikasi (1 halaman), Lembar Informasi Produk (4 halaman), Manual (19 halaman), Panduan Pengaturan Cepat (17 halaman)

Halaman Cetak

Checking your installation

To verify that your USB software installed properly, check the Device

Manager. Click Start, point to Settings, and click Control Panel. Then click

System and click the Device Manager tab.

You should see the device EPSON USB Conversion Cable Devices listed.

Click the + next to the device; you should see EPSON USB Conversion

Cable (EPXUSB1:) listed too.

Note:

If you've installed more than one USB printer device, each new installation

will increase the last digit of the USB conversion cable device name by a

factor of one. For example, a second installed USB printer device would be

listed as EPSON USB Conversion Cable (EPXUSB2:), and a third

installation would be listed as USB Conversion Cable (EPXUSB3).

If the printer doesn't work correctly, uninstall the printer software as

described in your printer documentation. Also uninstall the EPSON USB

printer device software the same way. Then reinstall the USB device and

printer software as described in this guide. If you've installed printer driver

software for the EPSON Stylus COLOR 600, remember to set up your

system to use Windows Print Manager. (See "Setting Up Your System to

Print to the EPSON Stylus COLOR 600" on the next page.)

If you still have problems, contact your EPSON dealer or EPSON technical

support as described in your printer documentation.