Epson Stylus Color 740 Panduan Informasi Produk - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Informasi Produk untuk Aksesori Printer Epson Stylus Color 740. Epson Stylus Color 740 17 halaman. Product support bulletin(s)
Juga untuk Epson Stylus Color 740: Lembar Informasi Produk (4 halaman), Brosur (2 halaman), Lembar Informasi Produk (4 halaman), Buletin Dukungan Produk (6 halaman), Buletin Dukungan Produk (1 halaman), Panduan Pengguna (24 halaman), Panduan Instalasi Perangkat Lunak (8 halaman), Spesifikasi (2 halaman), Petunjuk Penyiapan Cepat (5 halaman), Buletin Dukungan Produk (3 halaman), Buletin Dukungan Produk (2 halaman), Buletin Dukungan Produk (4 halaman), Buletin Dukungan Produk (7 halaman), Panduan Online (10 halaman)

Halaman Cetak

EPSON Stylus COLOR 740

Media Loading and Handling Guidelines

The following tips help you get the best results on any type of

paper:

Always handle sheets by the edges, and don't touch the

printable surface.

When you load paper, make sure the printable side is

facing up.

You can load paper up to the arrow mark on the left edge

guide.

Return unused sheets and envelopes to their original

package as soon as possible. See "Paper" on page 3 for more

storage information.

If your paper package included protective sheets, cover the

printed side of your paper with these sheets before stacking

your paper.

Use ink jet papers within one year of purchase. Use glossy

media and transparencies within six months.

Follow any specific instructions for your paper in the

following sections.

Letterhead, Preprinted Forms, and Legal-size Paper

Load the top edge first. When you load long paper, pull up the

paper support extension and both output tray extensions.

EPSON Photo Quality Glossy Paper, Film, and

Transparencies

Before you load glossy film or transparencies, put a support

sheet (packed with the media) or a plain paper sheet beneath

the stack. (Don't use a support sheet with Photo Quality

Glossy Paper.)

You can load up to 20 sheets of glossy paper or glossy film, or

up to 30 transparencies.

On Photo Quality Glossy Film, you may get better results by

loading one sheet at a time. With multiple sheets loaded, the

minimum top margin you can use is 1.2 inches (30 mm). If

you want to use a smaller top margin, load and print one sheet

at a time.

10 - EPSON Stylus COLOR 740

If your media has a cut corner, position it in the printer as

shown here.

printable

side up

Remove each sheet from the output tray immediately after it's

printed. Make sure each sheet is dry before stacking.

Note:

It is best not to use the Maximum printable area setting in the

printer software when printing on paper with a cut corner. Part of

your document may print in the cut out area.

Envelopes

You can load up to 10 envelopes flap edge first, with the

printable side up, as shown below:

Note:

If the stack of envelopes is more than 0.4-inch (10 mm) thick, press

the envelope edges to flatten them before stacking or load one

envelope at a time.

Select

as the Media Type and choose the correct

Plain paper

envelope size as the Paper Size setting in the printer software.

7/98

cut corner