Epson Stylus COLOR 860 Setup Manual - Halaman 2

Jelajahi secara online atau unduh pdf Setup Manual untuk Aksesori Printer Epson Stylus COLOR 860. Epson Stylus COLOR 860 17 halaman. Product support bulletin(s)
Juga untuk Epson Stylus COLOR 860: Lembar Informasi Produk (4 halaman), Spesifikasi (2 halaman), Penggantian Kartrid (2 halaman), Lembar Informasi Produk (4 halaman), Buletin Dukungan Produk (6 halaman), Buletin Dukungan Produk (1 halaman), Informasi Produk (12 halaman), Buletin Dukungan Produk (3 halaman), Buletin Dukungan Produk (2 halaman), Buletin Dukungan Produk (4 halaman), Buletin Dukungan Produk (7 halaman)

Attaching the Paper Support

Insert the paper support into the slots at the rear of the printer.

Make sure that the printer is turned off. It is off when the P power

button protrudes slightly from the surface of the control panel.

Check the label on the back of the printer to make sure the voltage

required by the printer matches that of the electrical outlet you will be

plugging it into. Also, make sure that you have the correct power cable

for your power source.

Caution:

It is not possible to change the printer's voltage. If the rated voltage and

your outlet voltage do not match, contact your dealer for assistance. Do

not plug in the power cord.

If the power cord is not attached to the printer, connect it to the AC inlet

on the back of the printer.

Plug the power cord into a properly grounded electrical outlet.