Dikkan DN300 Panduan Petunjuk Pengoperasian - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Unit Kontrol Dikkan DN300. Dikkan DN300 17 halaman.
Halaman Cetak
1. SAFETY TERMS
The signal terms DANGER, CAUTION and NOTICE are used in this operating manual in the event of notices related
special dangers, or for unusual information, requiring a special marking.
Danger infers that there is the danger of life and considerable damage in the event of non-compliance.
Caution infers that there is the danger of injuries and damage in the event of non-compliance.
Notice infers that attention is drawn to technical correlations/connections.
2. TECHNICAL FEATURES
Standard:
DIN 86251, DIN86252, DIN 86260, DIN 86261, EN 13709, DIN 3356
Face to Face:
Straight Form - EN 558 Series 1 (DIN 3202 F1) / Angle Form - EN 558 Series 8 (DIN 3202
F32)
Flange Dimension:
EN 1092-1, EN 1092-2, EN 1092-3
Material:
Cast Iron, Ductile Iron, Cast Steel, Stainless Steel, Bronze
Type:
Stop Type, SDNR Type, Regulating Disc, Bypass Disc
Application:
Steam, fresh water, air, oil, seawater, feed water, cold and hot water, gases
Operation:
Manual by handwheel (Option: Electric, Pneumatic, Hydraulic Actuator)
Pressure & Temperature Ranges
Cast Iron, Ductile Iron,
Bronze
Bore
DN15-DN200
DN250
DN300-DN350
DN400-DN600
Valves must not be used at higher "pressure & temperature" than defined "working pressure &
temperature".
Doc. No: FRM.65
Rev. No: 00 Rev. Date: 01.06.2015
Working Pressure
[bar]
120 ℃
180 ℃
16
10
10
6
6
4
4
2
Cast Steel,
Working Pressure
Stainless Steel
Bore
DN15-DN150
DN175-200
DN250-DN300
DN350
DN400-DN600
[bar]
120 ℃
40
16
10
6
4
1