Epson Stylus Color 880 Setup Manual - Halaman 2

Jelajahi secara online atau unduh pdf Setup Manual untuk Aksesori Printer Epson Stylus Color 880. Epson Stylus Color 880 17 halaman. Product support bulletin(s)
Juga untuk Epson Stylus Color 880: Lembar Spesifikasi (2 halaman), Buletin Dukungan Produk (6 halaman), Buletin Dukungan Produk (1 halaman), Lembar Informasi Produk (4 halaman), Spesifikasi (2 halaman), Mulai di sini (4 halaman), Panduan Pengguna (13 halaman), Buletin Dukungan Produk (3 halaman), Buletin Dukungan Produk (2 halaman), Buletin Dukungan Produk (4 halaman), Buletin Dukungan Produk (7 halaman), Panduan Memulai Cepat (2 halaman)

Attaching the Paper Support

Insert the paper support into the slots at the rear of the printer.

Follow the steps below to plug in the printer.

Make sure that the printer is turned off. It is off when the2 power light

is off.

Check the label on the back of the printer to make sure that the voltage

required by the printer matches that of the electrical outlet that you will

be plugging it into. Also, make sure that you have the correct power

cable for your power source.

Caution:

It is not possible to change the printer's voltage. If the rated voltage and

your outlet voltage do not match, contact your dealer for assistance. Do

not plug in the power cord.

If the power cord is not attached to the printer, connect it to the AC inlet

on the back of the printer.

Plug the power cord into a properly grounded electrical outlet.