Argos Technologies EVac Panduan Operator - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Operator untuk Peralatan Laboratorium Argos Technologies EVac. Argos Technologies EVac 20 halaman.

Halaman Cetak
Argos Technologies EVac™ — Operator's Manual

Operating EVac™

Preparing without level sensing

Preparing Vacuum Bottle

• Fit lid with barbed tube fittings onto bottle. Ensure that lid is firmly attached.

Connecting Vacuum Bottle to Instrument

• Twist filter onto connection on EVac™. Writing on filter should point away from
device. Twist filter until resistance is felt, then twist an additional half turn to ensure
that an adequate seal is achieved.
• Connect filter with short tube to the barbed tube fitting marked "PUMP" on lid of the
vacuum bottle.
Connecting Vacuum Bottle to HandEvac™ Handheld Aspirator
• Connect long tube from HandEvac™ or other suction tool to barbed tube fitting
marked "HAND" on lid of vacuum bottle.
9