Epson TM-L90 series Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Printer Epson TM-L90 series. Epson TM-L90 series 40 halaman. Attaching cover on the power switch
Juga untuk Epson TM-L90 series: Brosur (1 halaman), Brosur (2 halaman), Panduan Produk (27 halaman), Spesifikasi (2 halaman), Spesifikasi (8 halaman), Manual Informasi (5 halaman), Spesifikasi (4 halaman), Panduan Pengguna (17 halaman), Panduan Pengguna (21 halaman), Panduan Pengguna (21 halaman), Panduan Manufaktur (22 halaman), Mulai di sini (2 halaman), Mulai di sini (2 halaman), Manual (13 halaman), Petunjuk Manual (12 halaman), Panduan Pengguna (36 halaman), Panduan Pengembangan (34 halaman), Manual (2 halaman)

Note:

Be sure to close the cover completely by pushing down on the middle of the

cover.

Troubleshooting

ERROR light on or blinking

❏ Check to see that the paper roll cover is closed and check the

PAPER OUT light. Close the cover or replace the paper if necessary.

❏ If the printer has been printing a lot, the head may be hot. Wait for

the head to cool. Printing will resume automatically.

❏ If the autocutter is jammed, turn the printer off and then back on.

❏ If the paper roll cover will not open, see the section below.

❏ Turn off the printer and then turn it back on. If the light is still

blinking, call your supervisor or a service person.

Paper jam

Turn off the power and open the paper roll cover and check for a paper

jam. If there is a paper jam, remove the jammed paper and follow the

instructions in the Installing the Paper Roll section to prepare the

printer for printing.

The paper roll cover will not open

Turn on the printer and remove the cutter cover. To remove the cover,

use a tool such as a screwdriver, and insert it into one of the slots

indicated by a circle in the illustration below and push the cover

TM-L90 User's Manual 7

English