Epson TM-L90 series Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Printer Epson TM-L90 series. Epson TM-L90 series 17 halaman. Attaching cover on the power switch
Juga untuk Epson TM-L90 series: Brosur (1 halaman), Brosur (2 halaman), Panduan Produk (27 halaman), Spesifikasi (2 halaman), Spesifikasi (8 halaman), Manual Informasi (5 halaman), Spesifikasi (4 halaman), Panduan Pengguna (40 halaman), Panduan Pengguna (21 halaman), Panduan Pengguna (21 halaman), Panduan Manufaktur (22 halaman), Mulai di sini (2 halaman), Mulai di sini (2 halaman), Manual (13 halaman), Petunjuk Manual (12 halaman), Panduan Pengguna (36 halaman), Panduan Pengembangan (34 halaman), Manual (2 halaman)

CAUTION:

Never install the printer in locations that

receive direct sunlight. The diffuse reflection

from the roll paper may cause the label peeler

detector to malfunction. When a malfunction

occurs, the PAPER OUT LED starts flashing. Press

the FEED button to resume using the printer.

Note:

To hang the printer on the wall, see the Wall

Hanging Bracket Set Installation Manual provided

with the WH-10 for instructions.

Installing Roll Paper

Note:

Be sure to use roll paper that meets the specifications.

Make sure that the power is on.

Pull the peeler open lever forward and open the peeler cover. (See the

illustration on the left below.)

Pull the roll paper cover open lever forward, and open the roll paper cover.

(See the illustration on the right below.)

Insert the roll paper, as shown below.

TM-L90 with Peeler User's Manual 5

English