Epson TM-L90 series Panduan Manufaktur - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Manufaktur untuk Aksesori Printer Epson TM-L90 series. Epson TM-L90 series 22 halaman. Attaching cover on the power switch
Juga untuk Epson TM-L90 series: Brosur (1 halaman), Brosur (2 halaman), Panduan Produk (27 halaman), Spesifikasi (2 halaman), Spesifikasi (8 halaman), Manual Informasi (5 halaman), Spesifikasi (4 halaman), Panduan Pengguna (40 halaman), Panduan Pengguna (17 halaman), Panduan Pengguna (21 halaman), Panduan Pengguna (21 halaman), Mulai di sini (2 halaman), Mulai di sini (2 halaman), Manual (13 halaman), Petunjuk Manual (12 halaman), Panduan Pengguna (36 halaman), Panduan Pengembangan (34 halaman), Manual (2 halaman)

Confidential

APPENDIX B. MAINTENANCE

B.1 Cleaning the Autocutter

If the adhesive agent on the labels sticks to the autocutter, it may dull the blade. In this case,

clean the blade as described below:

Be sure that the printer is turned off. Collect and remove acumulated adhesive materials with

a flathead screwdriver.

Warning:

Be sure not to touch the edge of the autocutter directly with your fingers; otherwise,

your fingers might be injured.

NOTE: Be sure to remove as much of the adhesive agent as possible from the cutter blade

edge, but you do not need to polish the blade until it is absolutely clean. It is

recommended not to use an alcohol solvent. If an alcohol solvent is used, the adhesive

agent might begin to be dissolved, which can reduce the efficiency of the printer.

Adhesive Materials on the Blade

Removing Adhesive Materials with Flathead Screwdriver

TITLE

TM-L90

Roll Paper

Manufacturing Guide

SHEET

NO.

REVISION

SHEET