Epson TM-L90 series Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Aksesori Printer Epson TM-L90 series. Epson TM-L90 series 13 halaman. Attaching cover on the power switch
Juga untuk Epson TM-L90 series: Brosur (1 halaman), Brosur (2 halaman), Panduan Produk (27 halaman), Spesifikasi (2 halaman), Spesifikasi (8 halaman), Manual Informasi (5 halaman), Spesifikasi (4 halaman), Panduan Pengguna (40 halaman), Panduan Pengguna (17 halaman), Panduan Pengguna (21 halaman), Panduan Pengguna (21 halaman), Panduan Manufaktur (22 halaman), Mulai di sini (2 halaman), Mulai di sini (2 halaman), Petunjuk Manual (12 halaman), Panduan Pengguna (36 halaman), Panduan Pengembangan (34 halaman), Manual (2 halaman)

How to connect an Epson POS printer with Ethernet Interface

(Key: DIP SW2-8 On: refers to slide switch number 8, on switch bank 2, is turned On)

Cabling

Use a regular LAN patch cord to connect the printer to the LAN.

Getting initial printer and Ethernet adapter settings

Get the initial settings of the Ethernet adapter. Run the printer self test (hold down the feed button while turning on the

printer). The printer will print a list of initial settings including interface type and buffer capacity. verify that the interface is

"Ethernet"

A similar test can then be done on the UB-EO2 adapter by inserting a paperclip through the small hole in the adapter for 3

seconds.

http://www.beaglehardware.com/howtoethernet.html[3/4/2011 12:27:20 PM]

RJ-45 Female

(connector on computer and adapter end)

Ethernet cards use CAT5/6 patch cords

(Type IV)