Epson ActionPC 7000 Series Panduan Informasi Produk - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Informasi Produk untuk Desktop Epson ActionPC 7000 Series. Epson ActionPC 7000 Series 11 halaman. Product information guide

Halaman Cetak

Power Supply

200 Watt, UL/TUV/CSA listed, fan-cooled
Type
Input ranges
100-120 VAC or 200-240 VAC;
switch-selectable
Maximum
+5 VDC at 20 Amps, -5 VDC at 0.5 Amp
output
+12 VDC at 8 Amps, -12 VDC at 0.5 Amp
Frequency
50 to 60Hz
Cables
Two to main system board, five to mass
storage devices; for more
devices, Y cables can be installed on the
existing cables
Option slot power limits
output voltage (VDC) ) +5 volts
all slots
For

Environmental Requirements

Condition
Temperature
41° to 90° F
(5° to 32° C)
Humidity
20% to 90%
(non-condensing)
Altitude
-330 to 9,900 ft
(-100 to 3,000 m)

Jumper Settings

Miscellaneous jumper settings
Jumper
Jumper
number
setting
Function
JP4
1-2*
Selects 5V flash memory
2-3
Selects 12V flash memory
JP5
I Enables PCI IDE controller
1-2
Disables PCI IDE controller
JP11
Clears CMOS memory (resets SETUP values to
On
factory defaults)
o f f '
Normal CMOS values
JP12
1-2
Enables on-board I/O controller
l
Disables on-board I/O controller
JP15
I 1-2*
* Default setting
Parallel port ECP mode DRQ jumper settings
Function
JP13
DRQ1 (DACK1)*
1-2
DRQ4 (DACK3)
2-3
* Default setting
EPSON ActionPC/ActionTower 7000 series (including ActionTower 8400)
five
than
+12 volts
-4° to 140°F
(-20° to 60° C)
10% to 90%
-330 to 39,600 ft
(-100 to 12,000 m)
JP14
1-2
2-3
10/30/95
ActionPC/ActionTower 7000 series
* Off for DX4 (3x); 2-3 for DX2 (2X)
(including ActionTower 8400) - 3