Motorola GP340 ATEX Informasi Layanan - Halaman 17

Jelajahi secara online atau unduh pdf Informasi Layanan untuk Radio Dua Arah Motorola GP340 ATEX. Motorola GP340 ATEX 26 halaman. Professional radio, power distribution and controller
Juga untuk Motorola GP340 ATEX: Lembar Spesifikasi (5 halaman), Panduan Pengguna (31 halaman), Lembar Spesifikasi (2 halaman), Panduan Pengguna (30 halaman), Panduan Pengguna (30 halaman), Panduan Pengguna Dasar (10 halaman), Informasi Layanan (32 halaman), Informasi Layanan (30 halaman), Informasi Layanan (24 halaman), Informasi Layanan (31 halaman), Informasi Layanan (43 halaman), Informasi Layanan (30 halaman)

Motorola GP340 ATEX Informasi Layanan
Frequency Generation Circuitry
Tx
Rx
Battery Saver
In the receive mode, U241 pin 19 is low or grounded. This activates the receive VCO by enabling the
receive oscillator and the receive buffer of U241. The RF signal at U241 pin 8 is run through a
matching network. The resulting RF signal is the LO RF INJECTION and it is applied to the mixer at
T302.
During the transmit condition, when PTT is depressed, five volts is applied to U241 pin 19. This
activates the transmit VCO by enabling the transmit oscillator and the transmit buffer of U241. The
RF signal at U241 pin 10 is injected into the input of the PA module (U101 pin16). This RF signal is
the TX RF INJECTION. Also in transmit mode, the audio signal to be frequency modulated onto the
carrier is received through the U201 pin 41.
When a high impedance is applied to U241 pin19, the VCO is operating in BATTERY SAVER mode.
In this case, both the receive and transmit oscillators as well as the receive transmit and prescaler
buffer are turned off.
Table 2-1 Level Shifter Logic
Desired
AUX 4
Mode
Low
High
Low
AUX 3
High (@3.2V)
High (@4.8V)
Low
Low
Low
Hi-Z/Float (@2.5V)
TRB
2-9