Motorola MH230CLR Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Radio Dua Arah Motorola MH230CLR. Motorola MH230CLR 4 halaman.

Halaman Cetak

Note: When you connect a headset, the radio is automatically set

Menu Options

to the last chosen sensitivity level.

Selecting the Channel

Noise Filtering

The channel is the frequency your radio uses to transmit. See the

The

noise-filtering feature helps to ensure uninterrupted

"Channels and Frequencies" table under Licensing Information for

communication with other Motorola radios that have this feature.

details.

This feature also filters out unwanted transmissions from other

radios. This is useful in places where there is heavy radio traffic,

1. With the radio on, press

. When the radio is on a 0.5 watt

such as amusement parks or ski resorts.

channel,

displays. When the radio is on a 1 watt channel,

Note:

noise filtering is not available when the radio is scanning.

displays. The current channel flashes.

To turn

2. Press

and select an unused or quiet channel.

1. Press

3. Press

to save the channel setting or

to continue set up.

2. Press

Selecting the Interference Eliminator Code

3. Press

Interference Eliminator Codes help minimize interference by

blocking transmissions from unknown sources. Your radio has 121

To transmit to a radio that has

Interference Eliminator Codes. Codes 1 – 38 are the standard analog

1. Select the same channel and Interference Eliminator Code as

codes that appear on other FRS/GMRS radios. Codes 39 – 121 are

the other radio.

additional digital codes added for superior interference protection.

2. Press

0 is the off position, no analog or digital codes are enabled.

through the

To set the code for a channel:

3. Press

1. Press

until the code starts to flash.

Note: If you skip step 2, the beginning of your message may not be

2. Press

to select the code.

heard on the receiving radio. For a 30-second period, starting after

the last transmission, all transmissions received on the selected

3. Press

to save the code setting or

to continue set up.

channel and code will pass through the

You can set a different code for each channel using this procedure.

Keypad Tones

An extended press of

allows you to scroll through

the Interference Code rapidly so you can quickly reach the code

You may enable or disable the speaker key tones. You will hear the

key tone each time a button is pushed.

you want.

Note: You must set the Interference Eliminator Code to 0 on a radio

1. Press

that uses Interference Eliminator Codes to communicate with radios

2. Press either

that do not have Interference Eliminator Codes. Select 0 for "no

3. Press

tone, no code" and OFF will flash on your radio's display.

Note: When the key tone feature is off, the following are not

Setting and Transmitting Call Tones

disabled:

Your radio can transmit different call tones to other radios in your

•

Transmit timeout alert tone

group so you can alert them that you want to talk. You have 10 call

•

Call tone

tones from which to choose.

•

Low battery alert tone or

To set a call tone:

•

The transmitted talk confirmation tone

1. With the radio on, press

three times until the current

Transmitting a Talk Confirmation Tone

call tone setting (0 - 10) flashes and

appears.

You can set your radio to transmit a unique tone when you finish

2. Press

to change and hear the call tone.

transmitting. It is like saying "Roger" or "Over" to let others know

you are finished talking.

3. Press

to set the new call tone or

to continue set up.

1. With the radio on, press

To transmit your call tone to other radios set to the same channel

setting On/Off flashes.

and Interference Eliminator Code as your radio, press

2. Press

Note: Setting the call to 0 disables the call tone feature.

3. Press

Hands-Free Use Without Accessories (

)

You can use the iVOX feature to transmit hands-free without the need

for any headset accessories. Once iVOX is turned on, the radio detects

Keypad Lock

your voice and transmits when you speak into the internal microphone.

1. Press

until

appears on the display. The current

To avoid accidentally changing your radio settings:

setting On/Off will flash.

1. Press

2. Press

to select On or Off.

2. When in lock mode, you can turn the radio on and off, adjust

the volume, receive, transmit, send a call tone, and monitor

3. Press

to set or

to continue set up.

channels. All other functions are locked.

Hands-Free Use With Accessories (

)

To unlock the radio, press and hold

You can transmit hands-free more reliably with the use of optional

displayed.

headset accessories. Once VOX is turned on, the radio detects your

Scanning Channels

voice and transmits when you speak.

Use scan to search the 40 channels for transmissions from

Many accessories (sold separately) are available for your radio.

unknown parties, to find someone in your group who has

For more information, visit our Web site at

accidentally changed channels, or to quickly find unused channels

www.motorolasolutions.com/talkabout or shop.giantintl.com.

for your own use.

1. Turn the radio off and plug the VOX accessory into the

There is a priority feature and 2 modes of scanning (basic and

accessory port.

advanced) to make your search more effective. The basic scan

2. Turn the radio on. VOX shows on the display.

mode uses the channel and code combinations for each of the 40

channels as you have set them (or with the default code value of 1).

3. Adjust the volume appropriately by rotating

. Lower the

The "Advanced Scan" mode will scan all channels for any and all

volume before placing the accessory on your head or in your ear.

codes, detect any code in use, and use that code value temporarily

4. To turn off, simply remove accessory.

for that channel.

Note: There is a short delay between the time you start talking

Priority is given to the "home channel," that is, the channel (and

and when the radio transmits. There is a short delay before the

Interference Eliminator Code) your radio is set to when you start the

transmission is completed.

scan. This means the initial channel (and code setting) is scanned

Setting the Sensitivity Level When in

Mode

more often than the other 39 channels, and your radio will respond

Adjusting the radio's sensitivity level helps minimize the possibility

quickly to any activity occurring on the home channel as a priority.

of unintended noises triggering a transmission and helps the radio

To start Scanning:

pick up soft voices.

1. Briefly press the

1. Press

until VOX/iVOX and the level setting (1-3) appear on

display, and the radio will begin to scroll through the channel

the display.

and code combinations.

2. Press

to select the sensitivity level.

2. When the radio detects channel activity matching the channel

and code combination, it stops scrolling and you can hear the

3. Press

to set or

to continue set up.

transmission.

3 = High Sensitivity for quiet environments

3. To respond and talk to the person transmitting, press

2 = Medium Sensitivity for most environments

five seconds after the end of the transmission.

1 = Low Sensitivity for noisy environments

4. The radio will resume scrolling through the channels five

seconds after the end of any received activity.

5. To stop scanning, briefly press the

To start Advanced Scanning:

1. Set the Interference Eliminator Code to "zero" or OFF.

2. Briefly press the

and the radio will begin to scroll through the channels. No

Interference Eliminator Codes will filter what is heard.

3. When the radio detects channel activity with ANY code (or NO

code), it stops scrolling and you can hear the transmission. Any

Interference Eliminator Code that may be in use by that party

will be detected and displayed.

4. To respond and talk to the person transmitting, press

noise filtering on or off:

five seconds of the end of the transmission. The radio will

until

displays. The current setting On/Off will flash.

transmit using the newly detected Interference Eliminator Code.

to turn noise filtering On or Off.

5. The radio will resume scrolling through the channels five

seconds after the end of any received activity.

to confirm your selection or

to continue set up.

6. To stop scanning, briefly press the

noise filtering turned on:

Scanning Notes:

1. If you press

while the radio is scrolling through inactive

channels, the transmission will be on the "home channel".

to send a call tone. This allows your voice to pass

Scanning will resume five seconds after the end of your

noise filter on the receiving radio.

transmission. You may press the

and speak normally.

at any time.

2. If the radio stops on an undesired transmission, you may

immediately resume the scan by briefly pressing

3. If the radio repeatedly stops on an undesired transmission,

noise filter.

you may temporarily remove that channel from the scan list by

pressing and holding

remove more than one channel in this way.

4. To restore the removed channel(s) to the scan list, turn the radio

until

appears. The current setting On/Off will flash.

off and then back on, or exit and re-enter the scanning mode by

pressing

to turn On or Off.

5. You cannot remove the home channel from the scan list.

to confirm or

to continue set up.

6. In Advanced Scan, the detected code will only be used for

one transmission. You must note the code, exit scan, and set

that detected code on that channel to permanently use the

detected code.

until the

appears. The current

to turn On or Off.

to set or

to quit menu mode.

Special Features

and hold until

displays.

until

is no longer

key. The scan

will appear in the

within

key.

key. The scan

will appear in the display,

within

key.

key to stop scanning

for three seconds. You may

What Other Limitations Are There?

Warranty

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

Consumer Two-Way Radio Products and Accessories purchased in

Chile.

FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE

DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,

REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS

What Does this Warranty Cover?

LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE

Subject to the exclusions contained to the right, Giant International

CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER

Ltd. warrants the Motorola branded consumer two-way radios that

WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL

operate via Family Radio Service or General Mobile Radio Service

MOTOROLA SOLUTIONS, INC. OR GIANT INTERNATIONAL LTD. BE

that it manufactures ("Products"), the Motorola branded or certified

LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING

accessories sold for use with these Products that it manufactures

NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE

("Accessories") to be free from defects in materials and

OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT,

workmanship under normal consumer usage for the period(s)

INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY

outlined below. This limited warranty is a consumer's exclusive

KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS,

remedy, and applies as follows to new Motorola branded Products

LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT

and Accessories manufactured by Giant International Ltd., and

OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE

purchased by consumers in Chile, which are accompanied by this

THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE

written warranty:

DAMAGES MAY BE DISCLAIMED BY LAW.

Who is covered?

Some states and jurisdictions do not allow the limitation or

This warranty extends only to the first consumer purchaser, and is

exclusion of incidental or consequential damages, or limitation on

not transferable.

the length of an implied warranty, so the above limitations or

exclusions may not apply to you. This warranty gives you specific

What will GIANT INTERNATIONAL LTD. do?

legal rights, and you may also have other rights that vary from state

GIANT INTERNATIONAL LTD., at its option, will at no charge repair,

to state or from one jurisdiction to another.

replace or refund the purchase price of any Products or

Accessories that does not conform to this warranty. We may use

functionally equivalent reconditioned/ refurbished/ pre-owned or

new Products, Accessories or parts.

Products Covered

Length of Coverage

Products and Accessories as

Normal Wear and Tear. Periodic maintenance, repair and

One ( 1) year from the date of

defined above, unless otherwise

replacement of parts due to normal wear and tear are excluded

purchase by the first consumer

provided for below.

from coverage.

purchaser of the product unless

otherwise provided for below.

Batteries. Only batteries whose fully charged capacity falls below

1. Consumer Two-Way Radio

1. Ninety ( 90) days from the

80% of their rated capacity and batteries that leak are covered by

Accessories.

this limited warranty.

date of purchase by the first

consumer purchaser of the

Abuse & Misuse. Defects or damage that result from: (a) improper

product.

operation, storage, misuse or abuse, accident or neglect, such as

2. Products and Accessories

2. The balance of the original

physical damage (cracks, scratches, etc.) to the surface of the

that are Repaired or

warranty or for ninety ( 90)

product resulting from misuse; (b) contact with liquid, water, rain,

Replaced.

days from the date returned

extreme humidity or heavy perspiration, sand, dirt or the like, extreme

heat, or food; (c) use of the Products or Accessories for commercial

to the consumer, whichever

purposes or subjecting the Product or Accessory to abnormal usage

is longer.

or conditions; or (d) other acts which are not the fault of Motorola

Solutions, Inc. or Giant International Ltd., are excluded from coverage.

Use of Non-Motorola branded Products and Accessories. Defects

or damage that result from the use of Non-Motorola branded or

certified Products, Accessories, or other peripheral equipment are

excluded from coverage.

Unauthorized Service or Modification. Defects or damages

resulting from service, testing, adjustment, installation,

maintenance, alteration, or modification in any way by someone

other than Motorola Solutions, Inc., Giant International Ltd. or its

authorized service centers, are excluded from coverage.

Altered Products. Products or Accessories with (a) serial numbers

or date tags that have been removed, altered or obliterated; (b)

broken seals or that show evidence of tampering; (c) mismatched

board serial numbers; or (d) nonconforming or non-Motorola

branded housings, or parts, are excluded from coverage.

Communication Services. Defects, damages, or the failure of

Products or Accessories due to any communication service or

signal you may subscribe to or use with the Products or

Accessories is excluded from coverage.

How to Obtain Warranty Service or Information?

For Accessories, please call the telephone number designated

Please return product to the retailer, otherwise to obtain service or

above for the product with which they are used.

information, please call:

You will receive instructions on how to ship the Products or

Chile

Accessories at your expense, to a GIANT INTERNATIONAL LTD.

Authorized Repair Center. To obtain service, you must include: (a) a

0-800-201-442

copy of your receipt, bill of sale or other comparable proof of

purchase; (b) a written description of the problem; (c) the name of

your service provider, if applicable; (d) the name and location of the

installation facility (if applicable) and, most importantly; (e) your

address and telephone number.

Patent and Copyright Information

Manufactured, distributed or sold by Giant International Ltd., official

licensee for this product. MOTOROLA, MOTOROLA SOLUTIONS and

the Stylized M Logo are trademarks or registered trademarks of

Motorola Trademark Holdings, LLC and are used under license. All

other trademarks are the property of their respective owners.

Exclusions

MH230CLR