Epson Equity 386/33 PLUS Buletin Dukungan Produk
Jelajahi secara online atau unduh pdf Buletin Dukungan Produk untuk Desktop Epson Equity 386/33 PLUS. Epson Equity 386/33 PLUS 13 halaman. Product information guide
Juga untuk Epson Equity 386/33 PLUS: Panduan Informasi Produk (6 halaman)
Halaman Cetak
EPSON AMERICA, INC.
Product Support Bulletin
Subject: Epson Equity 386/33 PLUS and Monochrome Video Installation
Date: 06/04/93
Page(s): 1 of 3
This bulletin provides information regarding the installation and compatibility of
Monochrome Video sub-systems.
1.
Hardware Configuration:
CPU:
Memory:
Additional:
BIOS Rev:
FDD:
FDD:
HDC:
HDD:
Video:
Display:
Note: The Epson Monochrome Monitor (Model MBM-2095-E) was discontinued
as a sales item as of June 1991. However, it is available as a warranty
exchange item from the parts department.
2. Compatibility:
Monochrome Display Adapters are compatible on the Epson Equity 386/33
Plus system. Pre-configuring system C-MOS is required. Refer to page 2 of
this document for details.
3. Display Symptoms & Causes:
System CMOS must be pre-set to successfully install a Monochrome video
sub-system. The system will not sync properly after a Monochrome adapter
and display are installed. A common complaint at that point is that the system
is dead (no boot activity or keyboard response).
Epson Equity 386/33+
[ Serial Number: 64E2010044 ]
[ Configured System ]
4.0MB Standard, soldered on system board
not installed
D386-6080-031892-K2
Canon MD5501 5.25" half-height 1.2MB
Canon MD 3641G 3.5" half-height 1.44MB
Integrated on Main Logic Board
Quantum LPS-120
EIZO Enhanced MDA
[ Monochrome Display Adapter ]
Epson Monochrome Monitor
[ MBM-2095-E ]
PSB No: S-0162
Originator: JAM
Product Code
(A314221)
(A811371)
(A811381)
(A811951)
EPSON