Motorola TALKABOUT EM1000 series Panduan Pengguna - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Radio Dua Arah Motorola TALKABOUT EM1000 series. Motorola TALKABOUT EM1000 series 2 halaman. Talkabout
Juga untuk Motorola TALKABOUT EM1000 series: Panduan Pengguna (2 halaman), Panduan Pengguna (4 halaman), Panduan Pengguna (6 halaman)
Halaman Cetak
Note: Radios other than EM1000 series can receive the emergency
Setting the Sensitivity Level When in
or
Mode
alert signal but will not respond with adjusted volume settings,
Adjusting the radio's sensitivity level helps minimize the possibility
controlled transmission mode or unique alert tone. Users of other
of unintended noises triggering a transmission and helps the radio
radios will hear a steady 8 second tone and the 22 second voice
pick up soft voices.
transmission.
1. Press
until VOX and the level setting (1-3) appear on the
Warning: The Emergency Alert feature should only be used in the
display.
event of an actual emergency. Motorola is not responsible if there
2. Press
or
to select the sensitivity level.
is no response to the emergency alert from the receiving group.
3. Press
to set or
to continue set up.
Flashlight
Press the flashlight button to turn the light on. The switch functions
3 = High Sensitivity for quiet environments
as a momentary control for the light.
2 = Medium Sensitivity for most environments
Note: Turn off the light when not in use to conserve battery power.
1 = Low Sensitivity for noisy environments
Keypad Lock
Note: When you connect a headset, the radio is automatically set to
To avoid accidentally changing your radio settings:
the last chosen sensitivity level.
1. Press
Q
Noise Filtering
2. When in lock mode, you can turn the radio on and off, adjust the
T
The Q
noise-filtering feature helps to ensure uninterrupted
volume, receive, transmit, send a call tone, and monitor
T
communication with other Motorola radios that have this feature.
channels. All other functions are locked.
This feature also filters out unwanted transmissions from other
To unlock the radio, press and hold
radios. This is useful in places where there is heavy radio traffic,
displayed.
such as amusement parks or ski resorts.
Scanning Channels
Note: Q
noise filtering is not available when the radio is scanning.
T
Use scan to search the 22 channels for transmissions from
To turn Q
noise filtering on or off:
unknown parties, to find someone in your group who has
T
1. Press
until
displays. The current setting On/Off will flash.
accidentally changed channels, or to quickly find unused channels
for your own use.
2. Press
or
to turn noise filtering On or Off.
There is a priority feature and 2 modes of scanning ( basic and
3. Press
to confirm your selection or
to continue set up.
advanced ) to make your search more effective. The basic scan
To transmit to a radio that has Q
noise filtering turned on:
mode uses the channel and code combinations for each of the 22
T
1. Select the same channel and Interference Eliminator Code as
channels as you have set them ( or with the default code value of
the other radio.
1). The "Advanced Scan" mode will scan all channels for any and
2. Press
to send a call tone. This allows your voice to pass
all codes, detect any code in use, and use that code value
through the Q
noise filter on the receiving radio.
temporarily for that channel.
T
3. Press
and speak normally.
Priority is given to the "home channel," that is, the channel (and
Interference Eliminator Code) your radio was set to when you start
Note: If you skip step 2, the beginning of your message may not be
heard on the receiving radio. For a 30-second period, starting after
the scan. This means the initial channel (and code setting) is scanned
more often than the other 21 channels, and your radio will respond
the last transmission, all transmissions received on the selected
channel and code will pass through the Q
noise filter.
quickly to any activity occurring on the home channel as a priority.
T
To start Scanning:
Keypad Tones
You may enable or disable the speaker key tones. You will hear the
1. Briefly press the
display, and the radio will begin to scroll through the channel
key tone each time a button is pushed.
and code combinations.
1. Press
until
appears. The current setting On/Off will flash.
2. When the radio detects channel activity matching the channel
2. Press either
or
to turn On or Off.
and code combination, it stops scrolling and you can hear the
3. Press
to confirm or
to continue set up.
transmission.
Note: When the key tone feature is off, the following are not disabled:
3. To respond and talk to the person transmitting, press
five seconds after the end of the transmission.
•
Transmit timeout alert tone
4. The radio will resume scrolling through the channels five
•
Call tone
•
Low battery alert tone or
seconds after the end of any received activity.
•
The transmitted talk confirmation tone
5. To stop scanning, briefly press the
Transmitting a Talk Confirmation Tone
To start Advanced Scanning:
You can set your radio to transmit a unique tone when you finish
1. Set the Interference Eliminator Code to "zero" or OFF.
transmitting. It is like saying "Roger" or "Over" to let others know
2. Briefly press the
you are finished talking.
display, and the radio will begin to scroll through the channels.
1. With the radio on, press
until the
appears. The current
No Interference Eliminator Codes will filter what is heard.
setting On/Off flashes.
3. When the radio detects channel activity with ANY code (or NO
2. Press
or
to turn On or Off.
code), it stops scrolling and you can hear the transmission. Any
Interference Eliminator Code that may be in use by that party
3. Press
to set or
to quit menu mode.
will be detected and displayed.
4. To respond and talk to the person transmitting, press
Special Features
five seconds of the end of the transmission. The radio will
transmit using the newly detected Interference Eliminator Code.
Emergency Alert Mode
5. The radio will resume scrolling through the channels five
The Emergency Alert function can be used to signal others in your
group of your need for immediate help. All radios in your group using
seconds after the end of any received activity.
the same channel and interference eliminator code can receive the
6. To stop scanning, briefly press the
message. EM1000 series radios will automatically advance the
Scanning Notes:
speaker volume to a loud setting (the maximum rated output level),
1. If you press
regardless of the volume control position. A unique alert tone will be
channels, the transmission will be on the "home channel".
emitted from the receiving radios and heard by your group. The
Scanning will resume five seconds after the end of your
alert tone is also emitted from your own radio speaker to attract
transmission. You may press the
attention in your vicinity. Any spoken words or incidental sounds will
time.
be transmitted to others. EM1000 series radios will be operating in
2. If the radio stops on an undesired transmission, you may
an automatic "hands free" emergency transmission control mode
immediately resume the scan by briefly pressing
for a total of 30 seconds. For the duration of the emergency alert,
your radio will be locked into a transmitting mode and the other
3. If the radio repeatedly stops on an undesired transmission, you
may temporarily remove that channel from the scan list by
EM1000 radios in your group will be locked into a receiving mode to
help ensure the receipt of your emergency message.
pressing and holding
remove more than one channel in this way.
1. Press and hold the Emergency Alert button for 3 seconds.
4. To restore the removed channel(s) to the scan list, turn the radio
2. An alert signal will be transmitted for 8 seconds to alert other
off and then back on, or exit and re-enter the scanning mode by
receivers.
pressing
3. Your voice or incidental sounds will be transmitted for 22
5. You cannot remove the home channel from the scan list.
seconds. There is no need to continue to hold the Emergency
6. In Advanced Scan, the detected code will only be used for one
Alert button or use the PTT button for your message to be
transmission. You must note the code, exit scan, and set that
transmitted.
detected code on that channel to permanently use the detected
4. After 30 seconds your radio will return to normal two-way mode.
code.
EM1000 series radios will automatically return to the initial
volume setting as controlled by the volume knob. Both the
sender and the receiver will again be able to talk to each other
using the PTT or VOX methods of transmission control.
Your radio can tune in to broadcasts by the United States National
Oceanic and Atmospheric Administration (NOAA) Weather Radio
and Environment Canada Weatheradio.
You can listen to a weather channel (see "Weather Channels and
Frequencies" table below) or set your radio to alert you to
emergency weather broadcasts that interrupt routine broadcasts.
When you listen to a weather channel, you cannot use your radio in
scan mode or for two-way communications.
Both NOAA and Environment Canada have transmitters located
throughout the United States and Canada, respectively. These
transmitters broadcast watches, forecasts, and other information 24
hours a day.
Note: NOAA weather radio stations are assigned to cover specific
areas and service may be limited. Please check with your local
weather office for frequency and details, or visit
and hold until
displays.
www.weather.gov/nwr in the US or
www.msc.ec.gc.ca/msb/weatheradio in Canada to view the
appropriate transmitter for your area.
The use of the NOAA logo does not provide an endorsement or
implied endorsement by NOAA's National Weather Service, nor
until
is no longer
does the use of the Weatheradio logo provide an endorsement or
implied endorsement by Environment Canada.
Turning Weather Channel Reception On and Off
1. To turn weather reception on, press
seconds.
2. To turn off, press
Setting the Weather Channel
Your radio receives weather frequencies:
1. After turning weather reception on, press
channel flashes.
2. Press
or
to select the appropriate channel with good
reception in your area.
3. Press
to save the weather channel setting.
Setting the Weather Alert
Your radio can be set to respond to NOAA Weather Radio
emergency messages. A special alarm tone sounds an alert and
turns on the weather receiver to give you immediate weather and
emergency information.
1. After turning weather reception on, press
key. The scan
will appear in the
displays.
2. Press
or
to select On/Off. If you activate Weather Alert
and return to two-way mode,
3. Press
to save the Weather Alert setting.
4. Press
to return to two-way mode.
within
As with two-way radio reception, weather channel reception depends
on how close you are to a transmitter and whether you are indoors or
outdoors. Because weather channels are transmitted without codes,
they may contain static or noise. Weather Alert will not function while
key.
actively transmitting or receiving in two-way mode.
Channels and Frequencies
key. The scan
will appear in the
Channel Frequency
Description Channel
1
462.5625 MHz GMRS/FRS
2
462.5875 MHz GMRS/FRS
3
462.6125 MHz GMRS/FRS
within
4
462.6375 MHz GMRS/FRS
5
462.6625 MHz GMRS/FRS
6
462.6875 MHz GMRS/FRS
key.
7
462.7125 MHz GMRS/FRS
while the radio is scrolling through inactive
8
467.5625 MHz
9
467.5875 MHz
key to stop scanning at any
10
467.6125 MHz
11
467.6375 MHz
or
.
Weather Channels and Frequencies
or
for three seconds. You may
Weather
Channel
Frequency
WX1
162.550 MHz
.
WX2
162.400 MHz
WX3
162.475 MHz
WX4
162.425 MHz
WX5
162.450 MHz
WX6
162.500 MHz
Weather Receiver
Warranty
Consumer Two-Way Radio Products and Accessories purchased in
the United States or Canada.
What Does this Warranty Cover?
Subject to the exclusions contained to the right, Giant International
Ltd. warrants the Motorola branded consumer two-way radios that
operate via Family Radio Service or General Mobile Radio Service
that it manufactures ("Products"), the Motorola branded or certified
accessories sold for use with these Products that it manufactures
("Accessories") to be free from defects in materials and
workmanship under normal consumer usage for the period(s)
outlined below. This limited warranty is a consumer's exclusive
remedy, and applies as follows to new Motorola branded Products
and Accessories manufactured by Giant International Ltd., and
purchased by consumers in the United States or Canada, which are
accompanied by this written warranty:
and hold for three
or turn the radio off and then back on.
. The current
twice. On/Off
will display.
Frequency
Description
12
467.6625 MHz
FRS
13
467.6875 MHz
FRS
14
462.7125 MHz
FRS
15
462.5500 MHz
GMRS
16
462.5750 MHz
GMRS
17
462.6000 MHz
GMRS
18
462.6250 MHz
GMRS
FRS
19
462.6500 MHz
GMRS
Patent and Copyright Information
FRS
20
462.6750 MHz
GMRS
Manufactured, distributed or sold by Giant International Ltd., official
FRS
21
462.7000 MHz
GMRS
licensee for this product. Motorola, the Stylized M Logo, and other
Motorola trademarks and trade dress are owned by Motorola, Inc.
FRS
22
462.7250 MHz
GMRS
and are used under license from Motorola, Inc. MOTOROLA and the
Stylized M Logo are registered in the US Patent & Trademark Office.
All other product or service names are the property of their
respective owners. ©Motorola, Inc. 2008. All rights reserved.
Weather
Please contact customer service at 800-638-5119 or e-mail us at
Channel
Frequency
[email protected] for questions/ comments, warranty,
WX7
162.525 MHz
support or service related to this product.
WX8
161.650 MHz
WX9
161.775 MHz
WX10
161.750 MHz
WX11
162.000 MHz
Products Covered
Length of Coverage
Products and Accessories as
One (1) year from the date of
Normal Wear and Tear. Periodic maintenance, repair and
defined above, unless otherwise
purchase by the first consumer
replacement of parts due to normal wear and tear are excluded
provided for below.
purchaser of the product unless
from coverage.
otherwise provided for below.
Batteries. Only batteries whose fully charged capacity falls below
1. Decorative Accessories and
1. Limited lifetime warranty for
80% of their rated capacity and batteries that leak are covered by
Cases. Decorative covers
the lifetime of ownership by
this limited warranty.
and cases.
the first consumer purchaser
Abuse & Misuse. Defects or damage that result from: (a) improper
of the product.
operation, storage, misuse or abuse, accident or neglect, such as
2. Monaural Headsets. Ear
2. Limited lifetime warranty for
physical damage (cracks, scratches, etc.) to the surface of the
buds and boom headsets that
the lifetime of ownership by
product resulting from misuse; (b) contact with liquid, water, rain,
transmit mono sound through
the first consumer purchaser
extreme humidity or heavy perspiration, sand, dirt or the like, extreme
a wired connection.
of the product.
heat, or food; (c) use of the Products or Accessories for commercial
purposes or subjecting the Product or Accessory to abnormal usage
3. Consumer Two-Way Radio
3. Ninety (90) days from the
or conditions; or (d) other acts which are not the fault of Motorola or
Accessories.
date of purchase by the first
Giant International Ltd., are excluded from coverage.
consumer purchaser of the
product.
Use of Non-Motorola branded Products and Accessories. Defects
or damage that result from the use of Non-Motorola branded or
4. Products and Accessories
4. The balance of the original
certified Products, Accessories, Software or other peripheral
that are Repaired or
warranty or for ninety (90)
equipment are excluded from coverage.
Replaced.
days from the date returned
to the consumer, whichever
Unauthorized Service or Modification. Defects or damages
is longer.
resulting from service, testing, adjustment, installation,
maintenance, alteration, or modification in any way by someone
other than Motorola, Giant International Ltd. or its authorized
service centers, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers
or date tags that have been removed, altered or obliterated; (b)
broken seals or that show evidence of tampering; (c) mismatched
board serial numbers; or (d) nonconforming or non-Motorola
branded housings, or parts, are excluded from coverage.
Communication Services. Defects, damages, or the failure of
Products or Accessories due to any communication service or
signal you may subscribe to or use with the Products or
Accessories is excluded from coverage.
Who is covered?
What Other Limitations Are There?
This warranty extends only to the first consumer purchaser, and is
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
not transferable.
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE
What will GIANT INTERNATIONAL LTD. do?
DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,
GIANT INTERNATIONAL LTD., at its option, will at no charge repair,
REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS
replace or refund the purchase price of any Products or
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE
Accessories that does not conform to this warranty. We may use
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
functionally equivalent reconditioned/ refurbished/ pre-owned or
WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL
new Products, Accessories or parts.
MOTOROLA OR GIANT INTERNATIONAL LTD. BE LIABLE, WHETHER
How to Obtain Warranty Service or Other Information?
IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES
To obtain service or information, please call:
IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR
ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
USA Two-Way Radios
Canada Two-Way Radios
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE
OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR
1-800-638-5119
1-800-638-5119
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION
WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR
For Accessories, please call the telephone number designated
ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE
DISCLAIMED BY LAW.
above for the product with which they are used.
You will receive instructions on how to ship the Products or
Some states and jurisdictions do not allow the limitation or
exclusion of incidental or consequential damages, or limitation on
Accessories at your expense, to a GIANT INTERNATIONAL LTD.
Authorized Repair Center. To obtain service, you must include: (a) a
the length of an implied warranty, so the above limitations or
exclusions may not apply to you. This warranty gives you specific
copy of your receipt, bill of sale or other comparable proof of
legal rights, and you may also have other rights that vary from state
purchase; (b) a written description of the problem; (c) the name of
to state or from one jurisdiction to another.
your service provider, if applicable; (d) the name and location of the
installation facility (if applicable) and, most importantly; (e) your
address and telephone number.
Exclusions
EM1000