ARGtek POWER KING-X ARG-1210 Panduan Instalasi Cepat - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Router Jaringan ARGtek POWER KING-X ARG-1210. ARGtek POWER KING-X ARG-1210 18 halaman. Wlan 2t2r ap router for 802.11b/g/n
Juga untuk ARGtek POWER KING-X ARG-1210: Panduan Instalasi Cepat (18 halaman), Panduan Instalasi Cepat (4 halaman)
Halaman Cetak
[鍵入文字]
The front LED indicator
AP Router configuration
The AP Router is delivered with the following factory default parameters on the Ethernet LAN
interfaces.
Default IP Address: 192.168.1.254
Default IP subnet mask: 255.255.255.0
Web login User Name: <empty>
Web login Password: <empty>
The device has three operation modes (Gateway/Bridge/WISP).
The default IP addresses for the device are 192.168.1.254, so you need to make sure the IP
address of your PC is in the same subnet as the device, such as 192.168.1.X.
It will take about 55 seconds to complete the boot up sequence after power on.
ARGtek Communication Inc.
www.argtek.com
E‐Mail: [email protected] Tel:+ 886‐2‐2999‐6958 Fax :+ 886‐2‐2999‐7742