Motorola B803 Panduan Pengguna - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon Tanpa Kabel Motorola B803. Motorola B803 47 halaman. Dect 6.0 cordless answering system with bluetooth wireless technology
Juga untuk Motorola B803: Panduan Memulai Cepat (8 halaman)

Halaman Cetak

When the number displayed is in the correct format for dialing, following the above step to dial the

number.

3.3.16

Volume control

To adjust the listening volume on a handset: Press DIR / CID to adjust the listening volume when

on a call. Each press of the button increases or decreases the volume level by one increment.

NOTES

1. All volume settings (handset and speakerphone) are independent.

2. When the volume reaches the minimum or maximum setting, you will hear two beeps.

3.3.17

Multiple handset use

You can conference with another system handset while you are on a HOME or CELLULAR call.

However, you cannot conference between a HOME call and a CELLULAR call. A maximum of

two handsets can be used on an outside call. If a handset is already on a HOME call and you

would like to join the call, press HOME/FLASH or SPEAKER on another system handset.

If a handset is already on a CELLULAR call and you would like to join the call, press CELLULAR

on another system handset.

Press OFF/BACK or place the handset in the telephone base or charger to end the call. The call

will not be terminated until all handsets hang up.

NOTE

A maximum of

four

handsets can be used at a time. When two handsets are being used on either

the HOME or CELLULAR call, the other two system handsets can be used for a call on the line

that is not being used.

3.3.18 Mute

The mute function allows you to turn off the microphone. You can hear the caller, but the caller

will not be able to hear you.

To mute a call:

• Press DELETE/MUTE to turn off the microphone. When mute is on, the handset screen will

show MUTED for a few seconds and the MUTE icon will be shown until mute is turned off.

To un-mute a call:

• Press DELETE/MUTE again and resume speaking. When mute is turned off, MICROPHONE

ON will display temporarily on the handset screen.

3.3.19 Hold

You can place a HOME or CELLULAR call on hold. You will hear an alert tone if you have not

taken the call off of hold after 14 minutes. You will hear another alert tone 30 seconds later. At 15

minutes on hold, the call will automatically disconnect.

To place a HOME call on hold:

• Press the HOLD key on the handset. HOME LINE HELD will appear on the display and

HOME/FLASH LED will flash.

To resume a HOME call that is on hold:

• Press HOME/FLASH again.

To place a CELLULAR call on hold:

• Press the HOLD key on the handset. CELL LINE HELD will appear on the display and

CELLULAR LED will flash.