Motorola C1004LBI Memulai - Halaman 2

Jelajahi secara online atau unduh pdf Memulai untuk Telepon Tanpa Kabel Motorola C1004LBI. Motorola C1004LBI 2 halaman. C1lbi series

Halaman Cetak
5.4
Handset ringer volume
You can adjust the ringer volume and set different volume levels for your internal and external
m
m
calls. Choose from 5 volume levels or Off.
m
d
1. Press
, scroll
to
HANDSET
and press
.
u
d
2. Press
or
to select
INT RING VOL
or
EXT RING VOL
and press
.
m
u
d
3. Press
or
to select the volume (1 -5 or OFF) .
4. Press
to confirm or
to return to the previous menu.
NOTE
u
d
When the phone is ringing, you can adjust the ringer volume by pressing
or
5.5
Handset ringer melody
You can set different ringer melodies for your internal and external calls. Choose from 5 different
ringer melodies.
m
m
You will hear a sample ring as you scroll to each ring melody.
m
d
1. Press
, scroll
to
HANDSET
and press
.
u
d
2. Press
or
to select
INT MELODY
or
EXT MELODY
and press
.
u
d
3. Press
or
to select the ringer melody (1 - 5).
4.
NOTE
If you subscribe to your network providers caller ID service, calls from the numbers that you have
stored in the phonebook will ring using the ringer melody you have set when you store the entry.
5.6
Auto answer
T
Your phone is set to answer calls by lifting the handset off the base or charger. You can switch this
m
m
feature off so that calls can only be answered by pressing
.
m
d
1. Press
, scroll
to
HANDSET
and press
.
m
d
2. Scroll
to
AUTO ANSWER
and press
.
u
d
3. Press
or
to select
ON
or
OFF
and press
to confirm.
5.7
Handset name
m
m
If you are using more than one handset with your C1LBI base, you can set a personalized name for
each handset to easily distinguish between them. A name can be up to 10 characters long.
m
d
1. Press
, scroll
to
HANDSET
and press
.
m
d
2. Scroll
to
NAME
and press
.
3. Enter the new handset name and press
to confirm.
Delete the current name by pressing
.
7.3
Set alarm
m
m
Each handset can have a different alarm setting.
m
d
1. Press
, scroll
to
DATE -- TIME
and press
.
m
d
2. Scroll
to
ALARM SET
and press
.
u
d
3. Press
or
to select
ON
or
OFF
and press
to confirm.
4. If you select ON, enter the time in 24 hour format (e.g. 07--30 for 7:30am) and press
confirm.
7.4
Switch off alarm ring
When the alarm sounds, press any button to switch it off.
NOTE
If you are using the handset to make a call when the alarm ring is due, you will hear a beep in the
earpiece.
8. Caller ID and the Calls list
IMPORTANT
To use Caller ID, you must first subscribe to the service from your network provider. A subscription
fee may be payable.
To ensure that the caller's name is displayed, make sure you have stored the full telephone
number, including the area code in the phonebook.
If the call is a withheld call,
PRIVATE
will be displayed.
If the number is unavailable,
OUT OF AREA
will be displayed.
If the call is from an international number,
INTERNATION.
will be displayed.
If the call is from the operator,
OPERATOR
will be displayed.
If the call is from a payphone,
PAYPHONE
will be displayed.
If the call is from a ringback request,
RINGBACK
will be displayed.
8.1
Caller ID
If you have subscribed to a Caller ID Service, you will be able to see your caller's number on your
handset (provided it is not withheld) prior to answering the call. The display can toggle between
the first 12 and last 12 digits or characters of the phone numbers and names.
If your caller's name and number are stored in the phonebook and a number match is found, the
display will alternate between the name and the number.
8.2
Calls list
The Calls list stores details of your last 40 received calls, including the phone number and date
and time of the call.
The Calls list also alerts you when you have unanswered calls.
10. Help
No dial tone
•
Use only the telephone line cord supplied.
•
Check that the telephone line cord is connected properly.
•
Check that the mains power is connected properly and switched on.
No display
•
Check that the batteries are inserted correctly and fully charged. Use only approved
rechargeable batteries supplied.
•
Check that the handset is switched on. Press and hold
.
•
Reset the base by removing the batteries and disconnecting the mains power. Wait for
around 15 seconds before connecting it again. Allow up to one minute for the handset and
base to synchronize.
icon flashes
•
Handset is out of range. Move closer to the base.
•
Make sure that the handset is registered to the base.
•
Check that the mains power is connected properly and switched on.
Keypad does not seem to work
•
Check that the keypad lock is not on.
icon is not scrolling during charge
•
Adjust the handset slightly on the base.
•
Clean the charging contacts with a cloth moistened with alcohol.
•
Check that the mains power is connected properly and switched on.
•
The battery is full. When the handset is fully charged,
icon will appear steady on the display.
No Caller ID
•
Check your subscription with your network operator.
•
The caller may have withheld their number.
•
The record cannot be found in your phonebook. Check that you have the correct name /
number stored in your phonebook, with the full area code.
I have forgotten my PIN!
•
Restore your C1LBI to its default settings, see "6.7 Emergency default".
Cannot register a handset to the base
•
You can register up to a maximum of 4 handsets to a C1LBI base. You must de-register a
handset in order to register a new one.
•
Check that you have entered the correct PIN code (default = 0000).
•
Check that you are at least one metre away from other electrical equipment to avoid
interference when registering.
Handset does not ring
•
The handset ringer volume may be set to Off.
Noise interference on my phone or on other electrical equipment nearby
•
Place your C1LBI at least one metre away from electrical appliances or any metal obstructions
to avoid any risk of interference.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO
THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED.
IN NO EVENT SHALL MOTOROLA OR SUNCORP BE LIABLE, WHETHER IN CONTRACT OR
TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE
OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF
BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES
TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some jurisdictions do not allow the limitation or exclusion of incidental or consequential
damages, or limitation on the length of an implied warranty, so the above limitations or exclusions
may not apply to you. This warranty gives you specific legal rights, and you may also have other
rights that vary from one jurisdiction to another.
Products Covered
Length of Coverage
Consumer Products
One (1) year from the date of the products
original purchase by the first consumer
purchaser of the product.
Consumer Accessories (battery, power
Ninety (90) days from the date of the
supply(s) and line cords)
accessories original purchase by the first
consumer purchaser of the product.
Consumer Products and Accessories that
The balance of the original warranty or for
are Repaired or Replaced
ninety (90) days from the date returned to
the consumer, whichever is longer.
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal
wear and tear are excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and
batteries that leak are covered by this limited warranty.
Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or
abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of
the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy
perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for
commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or
(d) other acts which are not the fault of Motorola or SUNCORP are excluded from coverage.
5.8
Keypad lock using the menu
m
m
You can use the menu to lock the keypad.
m
d
1. Press
, scroll
to
HANDSET
and press
.
d
2. Scroll
to
KEYLOCK ?
and press
to confirm.
NOTE
To unlock the keypad, press any button on the keypad, then press
6. Base settings
6.1
Base ringer volume
m
m
.
Choose from 5 volume levels or Off.
d
1. Press
m
, scroll
to
SETUP
and press
. The display shows
BASE
VOLUME.
2. Press
.
m
u
d
3. Press
or
to select the volume (1 - 5 or OFF).
4. Press
to confirm or
to return to the previous menu.
6.2
Base ringer melody
Choose from 5 different base ringer melodies.
m
m
You will hear a sample ring as you scroll to each ringer melody.
m
d
1. Press
, scroll
to
SETUP
and press
.
d
2. Scroll
to
BASE MELODY
and press
.
m
u
d
3. Press
or
to select the ringer melody (1 - 5).
4. Press
to confirm or
to return to the previous menu.
6.3
Change base PIN code
Some functions are protected by a 4 digit PIN code which must be entered if you want to change
the settings. The default PIN is 0000. You can change this to your own preferred number.
m
m
When you enter a PIN, the digits are shown as ****.
m
d
1. Press
, scroll
to
SETUP
and press
.
d
2. Scroll
to
PIN CODE
and press
.
m
3. Enter the 4 digit PIN code (default = 0000) and press
4. Enter the new PIN and press
to confirm.
5. The display shows RETYPE. Re-enter the new PIN and press
The caller's details are stored in the Calls list whether or not you have answered the call. The list is
shared by all handsets registered to the base. When the list is full, and a new call is received, the
oldest entry will be deleted automatically.
When a new call is received in the Calls list,
icon will flash on the display in standby mode to
m
alert you. Once you have viewed the new calls,
icon disappears but
8.2.1
View the Calls list
d
to
1. Press
to open the Calls list. If there are no calls in the list, the display shows EMPTY.
u
d
2. Press
or
to scroll through the list.
•
If the call was answered,
icon is displayed as you scroll to the entry. If the call was
unanswered,
icon is displayed as you scroll to the entry..
•
If the caller's number exactly matches an entry stored in the phonebook, the display will
alternate between the name and the number. Press
•
If the telephone number is longer than 12 digits,
m
the remaining digits.
m
•
Press
again to see the time and date of the call.
•
Press
again to access the option to store the entry in your phonebook.
8.2.2
Dial a number in the Calls list
d
1. Press
to open the Calls list.
T
u
d
2. Scroll
or
to the entry you want.
3. Press
to dial the displayed entry.
8.2.3
Modify and dial a number in the Calls list
d
1. Press
to open the Calls list.
m
u
d
2. Scroll
or
to the entry you want.
m
3. Press
repeatedly until the display shows
MODIFY
4. Press
again and the display shows the number.
u
d
5. Scroll
or
to move the cursor to the digit that needs editing / deleting. Use the key pad
T
to input a digit or
to delet a digit.
6. Press
to dial out using the modified number.
NOTE
The edited entry cannot be saved in the Calls list.
8.2.4
Copy a Calls list number to the phonebook
d
1. Press
to open the Calls list.
u
d
2. Scroll
or
to the entry you want.
11. General information
IMPORTANT
This equipment is not designed to make emergency telephone calls when the power fails.
Alternative arrangements should be made for access to emergency services.
This product is intended for connection to analogue public switched telephone networks and
private switchboards in India.
Important safety instructions
Follow these safety precautions when using your phone to reduce the risk of fire, electric shock,
and injury to persons or property:
•
Keep all slits and openings of the phone unblocked. Do not set the phone on a heating
register or over a radiator. Ensure that proper ventilation is provided at the installation site.
•
Do not use while wet or while standing in water.
•
Do not use this product near water (for example, near a bath tub, kitchen sink, or swimming
pool).
•
Do not allow anything to rest on the power cord. Place the power cord so that it will not be
walked on.
•
Never insert objects of any kind into the product vents as that may result in fire or electric
shock.
•
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
•
Do not disassemble this product. If service or repair work is required, contact the customer
service helpline found in this user's Guide.
•
Do not overload wall outlets and extension cords.
•
Avoid using during an electrical storm. Use a surge protector to protect the equipment.
•
Do not use this phone to report a gas leak, especially if you are in the vicinity of the gas line.
IMPORTANT
To reduce the risk of fire, use only the supplied power adaptor.
Unplug this cordless phone immediately from an outlet if:
•
The power cord or plug is damaged or frayed.
•
Liquid has been spilled on the product.
•
The product has been exposed to rain or water. Do not retrieve the handset or base until
after you have unplugged the power and phone from the wall. Then retrieve the unit by the
unplugged cords.
•
The product has been dropped or the cabinet has been damaged.
•
The product exhibits a distinct change in performance.
Use of Non-Motorola branded Products and Accessories. Defects or damage that result from
the use of Non-Motorola branded or certified Products or Accessories or other peripheral
equipment are excluded from coverage.
Unauthorized Service or Modification. Defects or damages resulting from service, testing,
adjustment, installation, maintenance, alteration, or modification in any way by someone other
than Motorola, SUNCORP or its authorized service centers, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been
removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c)
mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or
parts, are excluded from coverage.
Communication Services. Defects, damages, or the failure of Products or Accessories due to any
communication service or signal you may subscribe to or use with the Products or Accessories is
excluded from coverage.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call: 1800 2700 361.
You will receive instructions on how to ship the Products or Accessories at your expense and risk,
to a SUNCORP Authorized Repair Center.
To obtain service, you must include: (a) the Product or Accessory; (b) the original proof of
purchase (receipt) which includes the date, place and seller of the Product; (c) if a warranty card
was included in your box, a completed warranty card showing the serial number of the Product;
(d) a written description of the problem; and, most importantly; (e) your address and telephone
number.
Technical Information
How many telephones can I have?
All items of telephone equipment have a Ringer Equivalence Number (REN), which is used to
calculate the number of items which may be connected to any one telephone line. Your C1LBI
has a REN of 1. A total REN of 4 is allowed. If the total REN of 4 is exceeded, the telephones may
not ring. With different telephone types, there is no guarantee of ringing, even when the REN is
less than 4.
Any additional handsets and chargers that you register have a REN of 0.
Connecting to a switchboard
This product is intended for use within India for connection to the public telephone network.
Recall
You may need to use the recall function if you are connected to a switch. Contact your PABX
supplier for further information.
IMPORTANT
If you change the PIN code, please keep a record of the new number.
6.4
Dial mode
Your C1LBI is set to tone dialling. You should only need to change this if connected to an older
m
icon is displayed.
type of switchboard / PBX which requires pulse dialling.
d
1. Press
, scroll
to
SETUP
within 5 seconds.
d
2. Scroll
to
DIAL MODE
and press
u
d
3. Press
or
to select
TONE DIAL
6.5
Flash setting
Depending on your country and network operator, your phone has the flash time set as 300 ms
m
(FLASH
1). It is unlikely that you need to change this setting unless advised to do so.
d
1. Press
, scroll
to
SETUP
d
2. Scroll
to
FLAS H
and press
u
d
3. Press
or
to select
FLASH 1
to confirm.
NOTE
You may need to use the flash function if you are connected to a PBX switch. Contact your PBX
supplier for further information.
6.6
Restore default settings
You can restore your C1LBI to its default (original) settings.
All the handsets that are registered to the base will be retained.
IMPORTANT
Resetting your phone to its default settings will delete all entries in the Redial list and Calls list. All
m
handset and base settings will also be reset.
d
1. Press
, scroll
to
SETUP
d
2. Scroll
to
DEFAULT
and press
m
3. Enter the 4 digit PIN code (default = 0000) and press
m
4. Press
to confirm or
automatically.
.
m
6.7
Emergency default
If you have lost your PIN code, you can still restore your C1LBI to its default settings.
to confirm.
1. Remove the batteries from the handset.
m
3. Press
repeatedly until the display shows
m
u
d
4. Scroll
or
to ADD?.
m
5. Press
again. The display shows NAME.
6. Enter the name and press
icon will remain.
7. Edit the number if necessary, then press
u
d
8. Press
or
to select the ringer melody you want and press
8.2.5
Delete an entry
d
1. Press
to open the Calls list.
m
u
d
m
2. Scroll
or
to the entry you want and press
m
3. Press
to confirm or
to see the caller's number.
8.2.6
Delete the entire Calls list
d
icon is displayed. Press
to see
1. Press
to open the Calls list.
m
2. Press and hold
. The display shows
3. Press
to confirm or
9. Using additional handsets
You can register up to 4 handsets to your C1LBI base to extend your phone system without having
to install extension sockets for each new phone.
Each C1LBI handset can be registered with up to 4 bases. You can then select the base you prefer
to use.
If you have purchased a C1LBI multiple pack, all additional handsets come pre-registered to the
base.
If you have purchased an additional handset separately, you must register it to your C1LBI base
before it can be used.
ENTRY.
9.1
Registering an additional handset
NOTE
Handset batteries must be fully charged before you start to register. Hold your handset close to
the base during the registration process. Handsets that were supplied with your C1LBI base are
already pre-registered.
On the base:
1. Press and hold
for 3 seconds. The base will remain in registration mode for 90 seconds.
m
On the handset:
d
1. Press
, scroll
to
REGISTER
Installation Guidelines
•
Read and understand all instructions and save them for future reference.
•
Follow all warnings and instructions marked on the product.
•
Do not install this product near a bath tub, sink, or shower.
•
Operate this phone using only the power source that is indicated on the marking label. If
you are unsure of the power supply to your home, consult with your dealer or local power
company.
•
Do not place this product on an unstable cart, stand, or table. This product may fall, causing
serious damage to the product.
•
Adjust only those controls that are covered by the operating instructions. Improper
adjustment of other controls may result in damage and will often require extensive work to
restore the product to normal operation.
•
Clean this product with a soft, damp cloth. Do not use chemicals or cleaning agents to clean
this phone.
•
Use only the power supply that came with this unit. Using other power supplies may damage
the unit.
•
Because this phone operates on electricity, you should have at least one phone in your home
that could operate without electricity in the case the power in your home goes out.
•
To avoid interference to nearby appliances, do not place the base of the phone on or near a
TV, microwave oven, or VCR.
Battery Safety Instructions
•
Do not burn, disassemble, mutilate, or puncture the battery. The battery contains toxic
materials that could be released, resulting in injury.
IMPORTANT
There is a risk of explosion if you replace the battery with an incorrect battery type. Use only
the batteries that came with your phone or an authorized replacement recommended by the
manufacturer.
•
Keep batteries out of the reach of children.
•
Remove batteries if storing over 30 days.
•
Do not dispose of batteries in fire, which could result in explosion.
•
The rechargeable batteries that power this product must be disposed of properly and
may need to be recycled. Refer to your battery's label for battery type. Contact your local
recycling center for proper disposal methods.
SAVE THESE INSTRUCTIONS
Cleaning
•
Clean the handset and base (or charger) with a damp (not wet) cloth, or an anti-static wipe.
•
Never use household polish as this will damage the product. Never use a dry cloth as this may
cause static shock.
2. Press and hold
3. Press
NOTE
m
When you do an emergency default the phonebook list will also be deleted.
m
6.8
and press
.
m
1. Press
.
2. Scroll
or
PULSE DIAL
and press
to confirm.
3. Enter the desired areas code (up to 6 digits) using keypad and press
m
NOTE
The area code is the STD code of the city (Area) where the cordless is connected e.g. for Delhi: 11
m
please set "11..." in the Area Code setting for Delhi. The handset will filter the local area code (set
and press
.
m
by user) while receiving or calling back the local number.
.
6.9
(short flash time) or
FLASH 2
(long flash time) and press
Auto answer
Internal melody
Internal volume
External melody
External volume
NOTE
When you do an emergency default the phonebook list will also be deleted.
7. Clock & alarm
If you have subscribed to Caller ID Service, the date and time will be set on all your handsets
whenever a call is received. You can also manually set the date and time on the individual
m
handsets.
m
7.1
and press
.
m
1. Press
.
2. Press
. The display shows
CONFIRM
?.
3. Enter the date (e.g. 12 / 08 / 15 for 12th of August 2015) and press
to return to the previous menu. Your C1LBI will restart
7.2
1. Press
2. Scroll
3. Enter the time in 24 hour format (e.g. 18--30 for 6:30pm) and press
MODIFY
ENTRY.
2. Scroll
3. Enter the base number (1 - 4). The base numbers that are already in use flash.
4. The display will ask for the PIN to be entered. Enter the 4 digit PIN code (default = 0000) and
m
press
. The number is displayed.
m
5. The display shows SEARCHING, the handset is automatically assigned an available handset
.
number. Use this number when making internal calls.
. The number is stored.
NOTE
If registration is not successful the first time, please repeat the process again in case the base
registration period ran out of time. If the base is not found after a few seconds, the handset
. The display shows
DELETE
?.
returns to standby. Try registering again.
to cancel.
If there are already 4 handsets registered to the base, the registration will fail. You must de-
register another handset before you can register a new one.
9.2
DELETE ALL
?.
If your C1LBI handset is registered to more than one base (e.g. one at work and one at home), you
can select which base to use.
to cancel.
Each handset can be registered with up to 4 bases.
1. Press
2. Press
1 2 3
3. Enter the base number that you want to use.
4. Press
standby.
NOTE
If the handset is registered to more than one base and the selected base has no power the
handset will automatically find a base with power and the best signal and select it.
9.3
Use one handset to de-register another. You cannot de-register the handset that you are using.
1. Press
2. The display shows
3. Enter the 4 digit PIN code (default = 0000) and press
m
4. Scroll
The display will return to the previous menu.
and press
.
Environmental
•
Do not expose to direct sunlight.
•
The handset may become warm when the batteries are being charged or during prolonged
periods of use. This is normal. However, we recommend that to avoid damage, do not place
the product on antique / veneered wood.
•
Do not place your product on carpets or other surfaces which generate fibres, or place it in
locations preventing the free flow of air over its surfaces.
•
Do not submerge any part of your product in water and do not use it in damp or humid
conditions, such as bathrooms.
•
Do not expose your product to fire, explosives or other hazardous conditions.
•
There is a slight chance that your phone could be damaged by an electrical storm. We
recommend that you unplug the power and telephone line cord during an electrical storm.
Product disposal instructions
Product disposal instructions for residential users
When you have no further use for it, please remove any batteries and dispose of them and the
product according to your local authority's recycling processes. For more information, please
contact your local authority or the retailer where the product was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and check the terms and conditions of the purchase
contract and ensure that this product is not mixed with other commercial waste for disposal.
Consumer Products and Accessories Warranty
Thank you for purchasing this Motorola branded product manufactured under license by Suncorp
Technologies Limited, 3001-3005 China Resources Building, 26 Harbour Road, Wan Chai, Hong
Kong. ("SUNCORP")
What Does this Warranty Cover?
Subject to the exclusions contained below, SUNCORP warrants that this Motorola branded
product ("Product") or certified accessory ("Accessory") sold for use with this product that it
manufactured to be free from defects in materials and workmanship under normal consumer
usage for the period outlined below. This Limited Warranty is your exclusive warranty and is not
transferable.
Who is covered?
This warranty extends only to the first consumer purchaser, and is not transferable.
What will SUNCORP do?
SUNCORP or its authorized distributor at its option and within a commercially reasonable time,
will at no charge repair or replace any Products or Accessories that do not conform to this limited
warranty. We may use functionally equivalent reconditioned / refurbished / pre-owned or new
Products, Accessories or parts.
Suncorp
to which this declaration related is in conformity with the essential requirements of the following
directives of the Council of the European Communities:
The products are compliant with the following standards:
For and on behalf of Suncorp Technologies Limited,
Signature:
Printed name & Position:
m
while replacing the batteries. The display shows
DEFAULT.
to confirm. Your C1LBI will restart automatically.
m
m
Area code setting
m
d
, scroll
to
SETUP
and press
.
m
d
to
AREA CODE
and press
.
to confirm.
Default settings
ON
Phonebook
Empty
1
Calls list
Empty
3
Redial list
Empty
3
PIN code
0000
3
Dial mode
Tone
m
m
Set the date
m
d
, scroll
to
DATE -- TIME
and press
. The display shows
DATE
SET.
m
to select.
to confirm.
m
m
Set the time
m
d
, scroll
to
DATE -- TIME
and press
.
m
d
to
CLOCK SET
and press
.
to confirm.
m
d
to
REG BASE
and press
.
m
.
Select a base
m
m
m
d
, scroll
to
REGISTER
and press
. The display shows
SELECT
BASE.
. All the bases that your handset has been registered to will be displayed, e.g.
4. The currently selected base number flashes.
m
to confirm. You will hear a confirmation beep and the display will return to
De-register a handset
m
m
m
d
, scroll
to
SETUP
and press
.
m
DEL
HANDSET, press
.
m
.
u
d
or
to the handset number that you want to de-register and press
.
Declaration of Conformity (DoC)
declares that the following products:
Brandname:
Motorola
Type:
C1001LBI, C1002LBI, C1003LBI and C1004LBI
Descriptions:
2.4G WDCT phone without telephone answering machine
(C100xLBI) and their multi-handset versions.
-
R&TTE Directive (1999/5/EC)
-
Ecodesign Directive (2009/125/EC)
Safety: EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
EMC: EN301489-1 v1.9.2 and EN301489-17 v2.2.1
RF Spectrum: EN300328 v1.8.1
Ecodesign: EC No 278/2009, 6 April 2009
CW Cheung
2015.09.24
14:49:40 +08'00'
______________________
CW Cheung – Chief Technical Officer
Date:
September 24, 2015
Place:
2/F, Shui On Centre, 6-8 Harbour Road, Hong Kong
BASE