Motorola C1202 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon Tanpa Kabel Motorola C1202. Motorola C1202 44 halaman. C12 series

1. Getting started

IMPORTANT

Do not place your C12 in the bathroom or other humid areas.

Location

You need to place your C12 base within 2 metres of the mains power socket

and 1.8 metres from the telephone wall socket so that the cables will reach.

The socket-outlet shall be installed near the equipment and shall be easily

accessible.

Make sure that it is at least 1 metre away from other electrical appliances

to avoid interference. Your C12 works by sending radio signals between the

handset and base. The strength of the signal depends on where you place

the base. Placing it as high as possible ensures the best signal.

HANDSET RANGE

The unit has a range of up to 300 metres outdoors when there is a clear line

of sight between the base and handset. Any obstruction between the base

and handset will reduce the range significantly. With the base indoors and

the handset either indoors or outdoors, the range will normally be up to 50

metres. Thick concrete and stone walls can severely affect the range.

SIGNAL STRENGTH

The

icon on your handset indicates that you are within range of the base.

When out of range of the base, the

icon flashes. If you are on a call, you

will hear a warning beep.

The line will hang up if the handset moves out of range of the base. Move

closer to the base. The handset will automatically reconnect to the base.

Setting up

IMPORTANT

The base station must be plugged into the mains power at all times. Do not

connect the telephone line cord into the wall socket until the handset is fully

charged. Use only the power adaptor and telephone line cord supplied with

the product.

Getting started