ARGtek 0004 Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Router Nirkabel ARGtek 0004. ARGtek 0004 15 halaman. Wi-fi + bluetooth usb dongle

2. 2. 2. 2. Setting & Use of the wireless netwo

Setting & Use of the wireless netwo

Setting & Use of the wireless network:

Setting & Use of the wireless netwo

After you finish the drive loading, the network connection sign under your right under corner of your

system will be indicated that the wireless network have been found, if there are wireless router or

wireless access point using in the inner environment:

Click this news, springs the wireless network connection dialog box, has listed the workable wireless

network connection in this dialog box which searches by the wireless LAN USB adapter, if the wireless

route or the wireless access point have encrypted, then in the network demonstrated on can appear this chart

sign of "

this wireless network you need the specific key, If the wireless network USB adapter discovered the wireless

network connection haven not been encrypted (has not demonstrated <begins using safely wireless

network>chart sign), then only need to select this wireless network, clicks <connect> on the right under

angle of the dialog box.

Then following we take connected begin using the safe wireless network as the example to be the

explanation,

(1) Firstly we need to select the wireless networking requested connection, for example, we select the

wireless network of <linksys-iton>:

(2) Click <connect> on the right under angle of the dialog box. Because this network is a safety wireless

network, have to input password:

Notice: The password is setup by the wireless router or wireless access point, therefore password what

input here, must be the same with what in the router or the wireless point. Besides, the password has to

be input twice, please make sure they are same.

(3) After inputting the password, click<connect> to continue, it will connect the wireless network

automatically, and system will inform when connect successfully.

Notice; if connecting unsuccessful, please repeat to operation.

It can access internet or LAN network by wireless network after connecting

rk: rk:

rk:

Begins using Safely wireless Network", expressed if wants to join