Motorola D1002 Panduan Pengguna - Halaman 18
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon Tanpa Kabel Motorola D1002. Motorola D1002 26 halaman. Digital cordless phone
Juga untuk Motorola D1002: Panduan Pengguna (45 halaman), Panduan Pengguna (26 halaman), Panduan Pengguna (50 halaman)
Halaman Cetak
8. Advanced settings
This setting is useful to access certain network and PABX/switchboard services.
Recall time
The default D1000 recall time is suitable for your country and network operator. It is unlikely that
you should need to change this setting unless advised to do so.
m
d
1. Press
, scroll
to
ADVANCED SET
and press
m
2.
RECALL TIME
is displayed. Press
.
u
d
3. Press
or
to select the setting you want: SHORT, MEDIUM, LONG.
m
4. Press
to confirm.
>
5. Press
to return to standby.
NOTE
The use of your D1000 cannot be guaranteed on all PABX.
Call barring
Prevent certain numbers from being dialled from your D1000. Store up to four specific numbers,
each up to 4 digits – for example, international or local prefixes.
Bypass call barring by switching the setting Off or On.
NOTE
If you switch Call barring on,
BARR MODE ON
will be displayed on your screen in standby mode.
Switch call barring on/off
m
d
1. Press
, scroll
to
ADVANCED SET
and press
d
m
2. Scroll
to
CALL
BARRING. Press
.
3. Enter the master PIN (default setting 0000) and press
m
4.
MODE
is displayed. Press
.
u
d
m
5. Press
or
to select
ON
or OFF. Press
>
6. Press
to return to standby. You can now set the number
(See below).
Set a number to be barred
m
d
1. Press
, scroll
to
ADVANCED SET
and press
d
m
2. Scroll
to
CALL
BARRING. Press
.
3. Enter the master PIN (default setting 0000) and press
d
m
4. Scroll
to NUMBER. Press
.
u
d
5. If necessary, scroll
or
to the next available slot.
m
6. Press
and enter the number or prefix you want to bar. Press
to confirm.
>
7. Press
to return to standby.
18
m
.
m
.
m
.
to confirm.
m
.
m
.
m
Easy call
When activated, this feature allows you to dial a number by pressing any key on your handset
>
(except
). This feature is very useful for access to emergency services.
Set the easy call number
m
d
1. Press
, scroll
to
ADVANCED SET
and press
d
m
2. Scroll
to
EASY
CALL. Press
.
3. Enter the master PIN (Default setting 0000) and press
d
m
4. Scroll
to NUMBER. Press
.
m
5. Enter the number. Press
to confirm
>
6. Press
to return to standby.
Switch easy call on/off
m
d
1. Press
, scroll
to
ADVANCED SET
and press
d
m
2. Scroll
to
EASY
CALL. Press
.
3. Enter the master PIN (default setting 0000) and press
m
4.
MODE
is displayed. Press
then press
>
5. Press
to return to standby.
NOTE
If you switch Easy call on,
EASY CALL ON
will be displayed on your screen in standby mode.
To switch Easy call off again:
>
1. Press
.
m
2.
OFF?
is displayed. Press
to confirm.
Dial an easy number
When an easy call number has been stored and the easy call setting switched on, press any key
>
(apart from
), to dial a number.
NOTE
When easy call is switched on, you can still answer any incoming call as normal.
Registration
Up to 5 handsets can be registered to one base station. Additional handsets must be registered
to the base before you can use them.
• The instructions described below apply specifically to your D1000 handset. If you wish to
register another manufacturer's handset, the instructions may vary. In this case, please refer to
the manufacturer of the additional handset.
• The Master PIN is required before you can register or unregister handsets. The default PIN is
0000.
m
.
m
.
m
.
m
.
u
d
m
or
to select
ON
or OFF. Press
to confirm.
Advanced settings