Motorola D1002 Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon Tanpa Kabel Motorola D1002. Motorola D1002 50 halaman. Digital cordless phone
Juga untuk Motorola D1002: Panduan Pengguna (45 halaman), Panduan Pengguna (26 halaman), Panduan Pengguna (26 halaman)
Halaman Cetak
Connecting the base
1. Plug the telephone line cord into the socket marked
2. Plug the mains power cable with the clear connector into the socket marked
underside of the base and plug the other end into the mains power wall socket. Switch
on the mains power.
Installing and charging the handset
1. Remove the battery cover from the back of the handset and insert the rechargeable
Ni-MH battery cells supplied. Please note the '+' and '-' markings inside the battery
compartment and insert in the correct direction.
2. Slide the battery cover back into place.
3. If you are charging the batteries for the first time, place the handset on the base to
charge for at least 24 hours continuously.
4. When the handset is fully charged,
other end of the telephone line cord (make sure that one end is already plugged into
the base) into the telephone wall socket.
Connecting the handset and charger
(for multi-pack only)
If you have purchased a multiple pack, you will need to carry out this process for all the
handsets and chargers.
8
on the underside of the base.
icon will appear steady on the display. Plug the
on the
Getting started