Motorola D1003 Panduan Pengguna - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon Tanpa Kabel Motorola D1003. Motorola D1003 26 halaman. Digital cordless phone
Juga untuk Motorola D1003: Panduan Pengguna (45 halaman), Panduan Pengguna (26 halaman), Panduan Pengguna (50 halaman)

Halaman Cetak
Motorola D1003 Panduan Pengguna

8. Advanced settings

This setting is useful to access certain network and PABX/switchboard services.

Recall time

The default D1000 recall time is suitable for your country and network operator. It is unlikely that
you should need to change this setting unless advised to do so.
m
d
1. Press
, scroll
to
ADVANCED SET
and press
m
2.
RECALL TIME
is displayed. Press
.
u
d
3. Press
or
to select the setting you want: SHORT, MEDIUM, LONG.
m
4. Press
to confirm.
>
5. Press
to return to standby.
NOTE
The use of your D1000 cannot be guaranteed on all PABX.

Dial mode

The default D1000 dialling mode is suitable for your country and network operator. It is unlikely
that you should need to change this setting unless advised to do so.
m
d
1. Press
, scroll
to
ADVANCED SET
and press
d
m
2. Scroll
to
DIAL
MODE. Press
.
u
d
3. Press
or
to select
TONE
or PULSE.
m
4. Press
to confirm.
>
5. Press
to return to standby.

Temporarily switch from Pulse to Tone dialling

*
1. Press and hold
.
The dial mode will change from Pulse to Tone for the duration of the call.

Call barring

Prevent certain numbers from being dialled from your D1000. Store up to four specific numbers,
each up to 4 digits – for example, international or local prefixes.
Bypass call barring by switching the setting Off or On.
NOTE
If you switch Call barring on,
BARR MODE ON
will be displayed on your screen in standby mode.

Switch call barring on/off

m
d
1. Press
, scroll
to
ADVANCED SET
and press
d
m
2. Scroll
to
CALL
BARRING. Press
.
3. Enter the master PIN (default setting 0000) and press
m
4.
MODE
is displayed. Press
.
u
d
m
5. Press
or
to select
ON
or OFF. Press
>
6. Press
to return to standby. You can now set the number
(See below).
Advanced settings
m
.
m
.
m
.
m
.
to confirm.

Set a number to be barred

m
d
1. Press
, scroll
to
ADVANCED SET
and press
d
m
2. Scroll
to
CALL
BARRING. Press
.
3. Enter the master PIN (default setting 0000) and press
d
m
4. Scroll
to NUMBER. Press
.
u
d
5. If necessary, scroll
or
to the next available slot.
m
6. Press
and enter the number or prefix you want to bar. Press
to confirm.
>
7. Press
to return to standby.

Easy call

When activated, this feature allows you to dial a number by pressing any key on your handset
>
(except
). This feature is very useful for access to emergency services.

Switch easy call on/off

m
d
1. Press
, scroll
to
ADVANCED SET
and press
d
m
2. Scroll
to
EASY
CALL. Press
.
3. Enter the master PIN (default setting 0000) and press
m
4.
MODE
is displayed. Press
then press
>
5. Press
to return to standby.
NOTE
If you switch Easy call on,
EASY CALL ON
will be displayed on your screen in standby mode.
To switch Easy call off again:
>
1. Press
.
m
2.
OFF?
is displayed. Press
to confirm.

Set the easy call number

m
d
1. Press
, scroll
to
ADVANCED SET
and press
d
m
2. Scroll
to
EASY
CALL. Press
.
3. Enter the master PIN (Default setting 0000) and press
d
m
4. Scroll
to NUMBER. Press
.
m
5. Enter the number. Press
to confirm
>
6. Press
to return to standby.

Dial an easy number

When an easy call number has been stored and the easy call setting switched on, press any key
>
(apart from
), to dial a number.
NOTE
When easy call is switched on, you can still answer any incoming call as normal.
m
.
m
.
m
m
.
m
.
u
d
m
or
to select
ON
or OFF. Press
to confirm.
m
.
m
.
17