Motorola D1010 Series Panduan Pengguna - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon Tanpa Kabel Motorola D1010 Series. Motorola D1010 Series 35 halaman. D1000 / d1010 series
Juga untuk Motorola D1010 Series: Panduan Memulai Cepat (2 halaman), Lembar Spesifikasi (4 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman)

Halaman Cetak
Motorola D1010 Series Panduan Pengguna

8. Advanced settings

This setting is useful to access certain network and PABX/switchboard
services.

Recall time

The default D1011 recall time is suitable for your country and network
operator. It is unlikely that you should need to change this setting unless
advised to do so.
m
d
ADVANCED SET
1. Press
, scroll
to
RECALL TIME
2.
is displayed. Press
u
d
3. Press
or
to select the setting you want:
m
4. Press
to confirm.
>
5. Press
to return to standby.
NOTE
The use of your D1011 cannot be guaranteed on all PABX.

Dial mode

The default D1011 dialling mode is suitable for your country and network
operator. It is unlikely that you should need to change this setting unless
advised to do so.
m
d
ADVANCED SET
1. Press
, scroll
to
d
m
DIAL MODE
2. Scroll
to
. Press
u
d
TONE
3. Press
or
to select
or
m
4. Press
to confirm.
>
5. Press
to return to standby.

Temporarily switch from Pulse to Tone dialling

*
1. Press and hold
.
The dial mode will change from Pulse to Tone for the duration of the call.

Call barring

Prevent certain numbers from being dialled from your D1011. Store up to
four specific numbers, each up to 4 digits – for example, international or
local prefixes.
Bypass call barring by switching the setting Off or On.
22
m
and press
.
m
.
SHORT
MEDIUM
LONG
,
,
m
and press
.
.
PULSE
.
NOTE
If you switch Call barring on,
screen in standby mode.

Switch call barring on/off

m
1. Press
, scroll
d
CALL BARRING
2. Scroll
to
3. Enter the master PIN (default setting 0000) and press
MODE
4.
is displayed. Press
u
d
5. Press
or
to select
>
6. Press
to return to standby. You can now set the number
(See below).
.

Set a number to be barred

m
1. Press
, scroll
d
CALL BARRING
2. Scroll
to
3. Enter the master PIN (default setting 0000) and press
d
NUMBER
4. Scroll
to
. Press
5. If necessary, scroll
m
6. Press
and enter the number or prefix you want to bar. Press
m
to confirm.
>
7. Press
to return to standby.

Easy call

When activated, this feature allows you to dial a number by pressing any
key on your handset (except
to emergency services.

Switch easy call on/off

m
1. Press
, scroll
d
EASY CALL
2. Scroll
to
3. Enter the master PIN (default setting 0000) and press
MODE
4.
is displayed. Press
m
Press
to confirm.
>
5. Press
to return to standby.
BARR MODE ON
will be displayed on your
d
m
ADVANCED SET
to
and press
m
. Press
.
m
.
m
ON
OFF
or
. Press
to confirm.
d
m
ADVANCED SET
to
and press
m
. Press
.
m
.
u
d
or
to the next available slot.
>
). This feature is very useful for access
d
m
ADVANCED SET
to
and press
m
. Press
.
m
u
d
then press
or
to select
Advanced settings
.
m
.
.
m
.
.
m
.
ON
OFF
or
.