Motorola D1010 Series Panduan Pengguna - Halaman 25

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon Tanpa Kabel Motorola D1010 Series. Motorola D1010 Series 35 halaman. D1000 / d1010 series
Juga untuk Motorola D1010 Series: Panduan Memulai Cepat (2 halaman), Lembar Spesifikasi (4 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman)

Halaman Cetak
Motorola D1010 Series Panduan Pengguna

Auto prefix

You can set the D1011 to detect a dialling number and replace it with
another number. The number to be detected can be up to 5 digits long. It
can be replaced with a number up to 10 digits.
m
d
ADVANCED SET
1. Press
, scroll
to
d
m
PREFIX
2. Scroll
to
. Press
DETECT DIGIT
3.
is displayed. Press
4. Enter the number you want to be detected and press
PREFIX NUM
5. Scroll to
. and press
6. Enter the number you want it replaced with and press
>
7. Press
to return to standby.

Country

If you move to another country you can set your phone to be compatible
with the network settings of that country.
Depending on your country, this option may be displayed as
you country may not be displayed.
m
d
ADVANCED SET
1. Press
, scroll
to
d
SEL. COUNTRY
2. Scroll
to
. Press
3. Enter the 4-digit master PIN and press
u
d
4. Scroll
or
to display the required country.
m
5. Press
to confirm.

Intrusion

When an external call is taking place, another handset registered to the
base can join in, making the call a 3-way conference, just by pressing
<
.
To enable this, Intrusion must be switched On.
m
d
ADVANCED SET
1. Press
, scroll
to
d
m
INTRUSION
2. Scroll
to
. Press
u
d
ON
OFF
3. Scroll
or
to
or
.
m
4. Press
to confirm.
>
5. Press
to return to standby.
Advanced settings
m
and press
.
.
m
.
m
.
m
.
m
.
NOT AVAIL
m
and press
.
m
.
m
.
m
and press
.
.

ECO mode

To reduce the level of power emissions, you can select low power or ECO
mode. When the ECO mode is set to
be reduced.
ON
To turn ECO Mode to
or
m
d
1. Press
, scroll
to
d
ECO MODE
2. Scroll
to
and press
u
d
3. Press
or
to highlight
- A confirmation beep is emitted and the handset display will switch
between the handset's name and
NOTE
When Eco Mode is set to
or
ON
, the base transmission power will
OFF
:
m
ADVANCED SET
and press
.
m
.
m
ON
OFF
or
then press
to confirm.
ECO MODE
.
ON
, the handset range will be reduced.
25