Motorola D1010 Series Panduan Pengguna - Halaman 29

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon Tanpa Kabel Motorola D1010 Series. Motorola D1010 Series 35 halaman. D1000 / d1010 series
Juga untuk Motorola D1010 Series: Panduan Memulai Cepat (2 halaman), Lembar Spesifikasi (4 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman)

Halaman Cetak

PLAY

3. Press

is displayed.

4. Press

, the handset will start the new message playback. Once

all messages are played, the handset will return to standby.

NOTE

During message playback, press

Memory full

The memory is full if there is less than 15 seconds of recording time left

or if the maximum total of 59 messages has been reached.

When the memory becomes full:

• The LED will flash quickly.

•

flashes quickly on the handset display.

• The machine will automatically switch to Answer Only mode.

If the memory becomes full while a caller is leaving a message, they will

hear a beep and the call is ended.

Help

anytime to return to standby.

10. Help

Charging

The

icon is not scrolling when the handset is placed on the base

• Bad battery contact – move the handset slightly

• Dirty contact – Clean the battery contact with a cloth moistened with

alcohol

• Battery is full – no need to charge

Calls

No dialling tone

• No power – check the connections. Reset the phone: unplug and plug

back in the mains

• Batteries are empty – charge the batteries for at least 24 hours

• You are too far from the base – move closer to the base

• Wrong line cable – use the line cable provided

• Line adaptor (when needed) is not connected to the line cord –

connect the line adaptor (when needed) to the line cord

Poor audio quality

The base is too close to electrical appliances, reinforced concrete walls

or metal doorframes – move the base at least one metre away from any

electrical appliances

The

icon is blinking

• Handset is not registered to the base – register the handset to the

base

• You are too far from the base – move closer to the base

No ring tone

• The ring tone is deactivated.

• Increase the volume.

Caller Line Identification (CLI) service does not work

Check your subscription with your network operator

Phonebook

A phonebook entry cannot be stored

The phonebook is full. Delete an entry to free memory