Motorola D1111 Panduan Pengguna - Halaman 30
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon Tanpa Kabel Motorola D1111. Motorola D1111 43 halaman. D1110 series digital cordless phone with answer machine
Juga untuk Motorola D1111: Panduan Memulai Cepat (2 halaman), Panduan Memulai (30 halaman)
Halaman Cetak
MEMORY FULL
If the memory is within 10 seconds of becoming full while a caller is
leaving a message, they will hear, "Please complete your message within
10 seconds". If they are still talking when the memory becomes full the
caller hears, "Thank you for calling", and the machine will hang up.
Answer Only
The OGM will set to
. You must delete messages before your
D1111 can record new messages.
Remote access
You can operate your answer machine from any Touchtone™ phone by
calling your D1111 and entering a 4 digit security code. Depending on the
language you have selected for your answer machine, for example,
Türkçe - voice prompt instructions will not be available.
Switch remote access On or Off.
d
Menu
Answer Machine
1. Press
, scroll
to
d
Answer Settings
2. Scroll
to
and press
u
d
Remote Access
3. Scroll
or
to
u
d
On
4. Scroll
or
to highlight
or
Back
5. Press
to return to previous menu or
Change the remote access PIN
d
Menu
Answer Machine
1. Press
, scroll
to
d
Answer Settings
2. Scroll
to
and press
u
d
Remote Access
3. Scroll
or
to
u
d
Set Remote PIN
4. Scroll
or
to highlight
5. Enter the Old 4-digit PIN and press
6. Enter the new 4-digit Pin and press
7. Enter the new PIN again and press
Back
8. Press
to return to previous menu or
It is advisable to make a note of your new PIN code and keep it
somewhere safe.
This PIN is different from the System PIN used when resetting the unit or
when registering/de-registering handset.
30
Select
and press
.
Select
.
Select
and press
.
Off
Select
and press
.
>
key to return to standby.
Select
and press
.
Select
.
Select
and press
.
Select
and press
.
Save
. (Default setting = 0000)
Save
.
Save
.
>
key to return to standby.
Switch your answer machine on remotely
If you forget to switch your answer machine on, you can do it remotely
from another phone.
1. Dial your telephone number and let it ring. After 14 rings you will hear
your outgoing message.
2. Press *, then enter your security code.
(Default setting = 0000)
0
3. Press
and your answer machine will switch on ready to answer
incoming calls.
Time saver
When you ring in to access your messages remotely, if your answer
machine is set to time saver and you have new messages it will answer
after 2 rings, if you do not have any new messages, it will answer after 6
rings. This means you can hang up after 3 rings knowing you have no
new messages, saving you time and the cost of the call.
You cannot use this feature if you have certain network features active as
the call will be intercepted before the 20 rings.
Operating your answer machine from another phone
1. Dial your phone number. When you hear your outgoing message,
*
press
.
2. Enter your 4 digit PIN. (Default setting = 0000)
Answer machine