Motorola D1114 Panduan Memulai Cepat

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Telepon Tanpa Kabel Motorola D1114. Motorola D1114 2 halaman. D1110 series digital cordless phone with answer machine
Juga untuk Motorola D1114: Panduan Memulai (30 halaman)

Halaman Cetak

D1100 / D1110 Series

Quick Start Guide

Getting started

Using the phone

Help

This Quick Start Guide provides all the information you need to get you

started. If you need more detailed instructions, a full user guide is available

to download in PDF format from:

www.motorola.com/cordless-phones

Please consider the environment before printing.

D1100

Digital cordless phone

D1110

Digital cordless phone with answering machine

Getting started

Step 3. Charge the handset

• When the handset is fully

charged, plug the telephone line

• Insert the 2 x AAA NiMH

cord into the socket marked

batteries supplied into the

on the underside of the base

handset and slide the battery

and plug the other end into the

compartment into place.

telephone wall socket.

• Place the handset on the

charger and charge for at least

Warning!

24 hours. When the handset is

Use only rechargeable batteries.

fully charged, the

icon is

If non-rechargeable batteries

displayed.

are used

WRONG BATTERY

will

be displayed and charging will

be stopped. Please replace with

rechargable batteries.

Box Contents

D1101 / D1111

D1101 base or D1111 base

handset

Mains power

Telephone line cord

adaptor for the base

with clear connector

D1100 / D1110 Series

Quick Start Guide

Getting started

Using the phone

Help

This Quick Start Guide provides all the information you need to get you

started. If you need more detailed instructions, a full user guide is available

to download in PDF format from:

www.motorola.com/eu/radios/technicaldocumentation.

Please consider the environment before printing.

Digital cordless phone

D1100

Digital cordless phone with answering machine

D1110

2 x AAA NiMH

Screws and

Quick Start

rechargeable

wall plugs for

Guide

batteries

wall mounting

Step 4. Select country

Step 5. Set Date and Time

• After charging your phone, the

• Press Menu and scroll

Welcome screen appears.

to Clock & Alarm then

press Select.

• A list of countries is displayed in

the Welcome screen.

• Date & Time is highlighted.

Press Select.

• Scroll

to your

country and press Select.

• Enter the date using the format

DD/MM/YY.

The handset and base will be reset

to load the correct settings and the

• Enter the time in 12 or 24 hour

standby screen is displayed.

time format. Press Save.

• Press

or Back until you

return to standby.

NOTE

If you have subscribed to your

network's Caller Display service, the

date and time is set automatically

for all handsets every time a call is

received.

Your phone is now ready for

use.

If you have purchased a multiple

Important

pack you will also have the

Only use the telephone line cord

following additional items:

supplied. This equipment is not

designed for making emergency

D1102/D1112

telephone calls when the power

• 1 x Additional handset and

fails. Alternative arrangements

charger

should be made for access to

emergency services.

• 2 x AAA NiMH rechargeable

batteries

• 1 x Mains power adaptor for

Warning!

charger with red connector.

Use only rechargeable batteries.

D1103/D1113

• 2 x Additional handsets and

chargers

• 4 x AAA NiMH rechargeable

batteries

• 2 x Mains power adaptors for

charger with red connector.

D1104/D1114

• 3 x Additional handsets and

chargers

• 6 x AAA NiMH rechargeable

batteries

• 3 x Mains power adaptors for

charger with red connector.

Handset

Earpiece

Display

Option button

(left)

Press to open the Menu.

Press to select options displayed

on screen.

Talk / Handsfree

In standby mode, press to make

and receive calls.

In talk mode, press to switch

handsfree on and off.

Navigator glow ring

lluminates when the phone is

in use. Flashes to indicate new

event, eg. missed call.

star key

Press and hold to switch between

Tone and Pulse dialling.

Int (Intercom)

Used to make internal calls.

R (Recall)

For use with switchboard/PBX.

Getting started

Step 1. Set up the base

• Plug the mains power cable

(with a clear connector) into

the socket marked

on the

underside of the base and plug

the other end into the mains

power wall socket.

• Switch on the power supply

Tip

Position the base at least 1

metre away from other electrical

appliances to avoid interference.

Putting it as high as possible

ensures the best signal.

Display icons

Displayed in standby mode to indicate handset is in range of the

Redial / Up

base.

In standby, press to open and

Flashes if you move out of range.

scroll through the redial list.

In talk mode, press to adjust the

Displayed if ECO Mode is switched on

volume.

Handset ringer volume is Off.

In menu mode, press to scroll

through the options.

Displayed in handsfree talk mode.

When storing an entry in the

phonebook, press and hold to

Answering machine is On. (for D1110 only)

enter a Pause.

The alarm is set to On.

Option button (right)

In standby, press to open the

The keypad is locked.

Phonebook menu.

You have answering machine (TAM) messages. (for D1110 only)

Press to select options displayed

on screen.

You have text messages.*

Phonebook / Down

You have voicemail messages.*

In standby, press to open and

scroll through the Names list.

You have missed calls.*

In talk mode, press to adjust the

volume.

The approximate power levels of your battery are indicated as below:

In menu mode, press to scroll

through the options.

Battery is fully charged.

End call / Power on / off

Battery is partially charged.

Press to end a call.

Battery is running low.

In menu mode, press to return

to standby.

Battery is almost fully discharged (Red).

In standby, press and hold to

* For this feature to work, you must subscribe to your network provider's

switch the handset off. When

off, press to switch the handset

Caller Display service. A quarterly fee may be payable.

back on.

NOTE

# / Lock

When the memory for TAM or text messages is full,

Press and hold to lock the keypad.

will appear below their corresponding reminder icon.

To unlock, select Unlock and follow

the on screen instructions.

Important

The base station must be plugged

into the mains power at all times.

Do not connect the telephone line

cord into the wall socket until the

handset is fully charged. Only use

the power and telephone cables

supplied with the product.

Step 2. Connect the charger

(Multi-pack only)

• Plug the mains power cable

(with a red colour connector)

into the socket marked

the underside of the charger

and plug the other end into the

mains power wall socket.

• Switch on the power supply.

an exclamation mark